Perminator Installation Instructions
PERMINATOR underslab vapor barrier/retarder is a new generation of polyolefin-based resin/chemical technology. PERMINATOR’s new resin technology allows dramatically greater puncture resistance while maintaining one of the lowest perm ratings in the market.
CLAY-TITE Underslab Installation Guidelines
This document has been created as an addendum to our CLAY-TITE technical data sheet to provide information regarding the application of CLAY-TITE bentonite waterproofing membrane when installed below slab-on-grade.
CLAY-TITE Blindside Installation Guidelines
This document has been created as an addendum to our CLAY-TITE technical data sheet to provide information regarding the application of CLAY-TITE Bentonite Waterproong Membrane when installed up against a soil retention system in a blindside application.
CLAY-TITE Backfilled Walls Installation Guidelines
This document has been created as an addendum to our CLAY-TITE technical data sheet to provide information regarding the application of the CLAY-TITE bentonite waterproofing membrane when installed on backfilled walls.
PRECON Cold Weather Application
W. R. MEADOWS has developed a low-temperature version of PRECON for applications below 40° F (5° C). The minimum ambient and substrate temperature for PRECON LOW TEMP is 25° F (-4° C).
Technical Bulletin: Precon Hydrastop SA End Lap Taping Method
Following is a step-by-step procedure showing the sequence of a horizontal application using the Tape Method.
PRECON Horizontal Application Installation Guidelines
This document has been created as an addendum to our PRECON technical data sheet to provide information regarding the application of PRECON waterproofing/vaporproofing membrane in a horizontal application.
PRECON Soil Nail Installation Instructions
Ensure soil nail is clean and clear of any contaminants that could be detrimental to the bond of the HYDRALASTIC 836. Apply BEM around all edges of the soil nail plate and all areas around the nut. Apply HYDRALASTIC 836 over the complete soil nail and plate, covering the soil nail area.
Precon Outside Corners Installation Instructions
Install PRECON according to installation instructions onto the soil stabilization system.
PRECON Installation Guidelines
This document has been created as an addendum to our PRECON technical data sheet to provide information regarding the application of PRECON waterproofing/vaporproong membrane when installed up against a soil retention system in a blindside application.
MEL-ROL Installation Guidelines
This document has been created as an addendum to the MEL-ROL technical data sheet to provide the recommended procedure to use when installing MEL-ROL self-adhesive waterproofing membrane from W. R. MEADOWS.
HYDRALASTIC 836/HYDRALASTIC 836 SL Priming Installation Guidelines
This document has been created as an addendum to our HYDRALASTIC 836 and HYDRALASTIC 836 SL technical data sheets to provide information regarding the recommended method of priming.
