How to Use the Strong-Drive SDWC Truss Screw
The Strong-Drive SDWC Truss screw provides a stud-to-bottom plate or stud-to-top plate connection, as well as fastening trusses and rafters to top plates.
Strong-Drive® SDWS TIMBER Screw
Simplify outdoor projects with structural wood-to-wood connections, including ledgers, using Strong-Drive® SDWS TIMBER Screws.
How Does the Strong-Drive SDWS Timber Screw Compare to a Traditional Lag Bolt Screw?
The Strong-Drive SDWS Timber Screw is designed to provide an easy-to-install, high-strength alternative to through-bolting and traditional lag screws. It's ideal for the contractor and do-it-yourselfer alike.
How to Install the Strong-Drive SDWS Timber Screw
The Strong-Drive SDWS Timber Screw is designed to provide an easy-to-install, high-strength alternative to through-bolting and traditional lag screws. It's ideal for the contractor and do-it-yourselfer alike.
How to Use the Strong-Drive SDWS Timber Screw
The Strong-Drive SDWS Timber Strength Screw is designed to provide an easy-to-install, high-strength alternative to through-bolting and traditional lag screws.
Deck-Drive DSV Wood Screw
The Deck-Drive™ DSV Wood Screw from Simpson Strong-Tie is a powerful fastening solution for wood-to-wood decking applications. Its fast-start tip easily pierces deck boards with no pre-drilling.
MASA Cast-in-Place Mudsill Anchor
MASA provides the installation advantages of mudsill anchors combined with the maximum allowable on-center spacing.
Titen Family Line of Concrete and Masonry Screw Anchors
Learn about the Titen family of concrete and masonry anchoring solutions from Simpson Strong-Tie. Our broad range of versatile products offer high performance for every application.
Installing Anchors with AT-XP® Anchoring Adhesive
Simpson Strong-Tie AT-XP® is a fast-cure, all-weather, high-strength acrylic adhesive for anchoring threaded rod and rebar into concrete.
SET-3G High-Strength Epoxy Adhesive
The high-strength anchoring adhesive can be installed in extreme concrete temperatures from 40°F to 100°F, as well as in dry or water-filled holes in concrete.
Build a Stronger Deck: Guard Post Connections
A deck’s guard posts are the vertical members along the open sides of the deck that connect the handrails to the framing. To provide the required 200 lb. load resistance at the handrail, the post must be fastened to the rim joist and tied back into the joist framing.
