Sikadur 52 2-Component Epoxy Injection Adhesive 3 Gallon

Sika Corporation
Item #
SIKA-91258
Mfr. Model # 91258

Sikadur 52 2-Component Epoxy Injection Adhesive, 3 Gallon

Sikadur 52 is a 2-component, 100% solids, moisture-tolerant, epoxy adhesive. It is a low-viscosity, high-strength adhesive formulated specifically for grouting both dry and damp cracks. It conforms to the current ASTM C-881, Types I and II, Grade-1, Class C, and AASHTO M-235 specifications.

Uses:

  • Use neat for gravity feed or pressure injection of cracks in structural concrete, masonry, wood, etc.
  • Seal interior slabs and exterior above grade slabs from water, chlorides and mild chemical attack and to improve wearability.

Characteristics and Advantages:

  • Tenacious crack-sealing grout.
  • Convenient easy mix ratio A:B = 2:1 by volume.
  • Advanced low-viscosity structural resin.
  • Unique, high-strength adhesive for ‘can’t dry’ cracks

  • Tenacious crack-sealing grout.
  • Convenient easy mix ratio A:B = 2:1 by volume.
  • Advanced low-viscosity structural resin.
  • Unique, high-strength adhesive for ‘can’t dry’ cracks
  • Use neat for gravity feed or pressure injection of cracks in structural concrete, masonry, wood, etc.
  • Seal interior slabs and exterior above grade slabs from water, chlorides and mild chemical attack and to improve wearability.
Product Details
Specification Description
# of Components: Two Component
Adhesive/Glue Type: Epoxy & Structural Adhesives
Brand Name: Sika Corporation
Brand Part Number: 91258
Class (ASTM C-881): Class C - For Use Above 60°F
Color: Clear/Pale Yellow
Compressive Strength: Varies with Time & Temperature
Consistency: Liquid
Elongation at Break: 0.031
Flexural Strength: 5,400 psi
Grade (ASTM C-881): Grade 1 - Low Viscosity
Heat Deflection Temperature: 122 °F
Model: Sikadur 52
Modulus of Elasticity in Compression: 3.5 x 10^5 psi
Modulus of Elasticity in Flexure: 3.8 x 10^5 psi
Package Type: Pail
Pot Life: 30 Minutes
Primary Application: Construction & Concrete
Shear Strength: 4,300 psi
Shelf Life: 730 Days
Size: 3 Gallon
Specifications Met: AASHTO M-235, ASTM C-881 Type I/II Grade 1 Class C
Tensile Modulus of Elasticity: 2.0 x 10^5 psi
Tensile Strength: 7,900 psi
Type (ASTM C-881): Type I - Bonding Hardened Concrete to Hardened Concrete (Non-Load Bearing), Type II - Bonding Fresh Concrete to Hardened Concrete (Non-Load Bearing)
Viscosity: 200 cps
Water Absorption: 0.015
$311.58 / each
  • 4+ for $306.05 / each

Estimated to ship Mon. Jul 08.
This item contains hazardous materials. Additional shipping fees will be applied at checkout. Special shipping conditions and/or additional freight charges may apply for this product. If so, you will be contacted by an EMI Supply representative prior to your order being shipped. This item cannot be shipped via air carrier.