SikaTop 144 Waterproofing Polymer-Modified Cementitious Coating Gray 5 Gallon

SikaTop 144 Waterproofing, Polymer-Modified, Cementitious Coating, Gray, 5 Gallon

Polymer-modified, 2-component, cementitious coating. Designed for use on concrete, mortar, and masonry substrates. Easily applied by brush, roller, or spray equipment. This fine-textured, abrasion-resistant coating is used for protection against deicing salts and for dampproofing/waterproofing.

Advantages:

• Potable water approved.
• Bond strength ensures superior adhesion.
• Increases resistance of substrate to deicing salts.
• Does not create a vapor barrier.
• No mixed water is needed...liquid co-polymer triggers a special blend of cement, fillers, and admixtures.
• Superior abrasion resistance.
• No batching...factory proportioned unit ensures consistent composition and high quality. Non-flammable; low odor.
• Easily applied to clean, sound substrates.
• Approved for use in contact with potable water.
• USDA-approved for use in food plants.
• May be overcoated with Sikagard protective coatings.

Where to Use:

• Use on grade, above, and below grade on concrete, masonry, and mortar.
• Use on horizontal, vertical, and overhead surfaces, both interior and exterior.
• Potable water tanks.
• Use as a coating over newly repaired concrete to provide a monolithic/uniform appearance. 
• Use as a protective coating to reduce the effect of deicing salt on concrete.
• Use as a protective coating for waterproofing, dampproofing, and improved resistance to weathering. 
• Use on concrete and masonry substrates to improve abrasion resistance to foot traffic and light pneumatic-tire traffic.
• Use to coat the backside of architectural curtain wall panels to prevent water intrusion from the outside.