Sika FerroGard 908 CA Reactive Penetrating Sealer w/Corrosion Inhibiting Properties, 5 Gallon Pail

Sika FerroGard 908 CA Reactive Penetrating Sealer w/Corrosion Inhibiting Properties, 5 Gallon Pail

Sika FerroGard-908 CA is designed to be applied to the concrete surface. Sika FerroGard-908 CA penetrates the concrete and may impart properties that mitigate active corrosion and/or delay the onset of corrosion.

Recommended Uses:

• Bridges and highways exposed to corrosive environments (deicing salts, weathering)
• Building facades and balconies
• Parking garages
• Piers, piles, and concrete dock structures
• Vertical, horizontal and overhead surfaces
• As part of Sika’s system approach for buildings and civil engineering

Features & Benefits:

• Passes - USBR M-82 Corrosion Mitigation Test Protocol
• Significantly reduces active corrosion due to chlorides and or carbonation, even in cracked concrete
• Increases the resistivity of the reinforced concrete
• Enhances the durability of reinforced concrete
• Long term efficiency, deep penetration
• Does not require concrete removal
• Repels additional water and chloride ions
• Contains amino alcohol corrosion inhibitor
• Ready to use and easily applied by spray or roller
• Adds additional benefits when used prior to protective coatings in concrete restoration systems
• Not a vapor barrier; allows vapor diffusion
• Proven effective per ASTM G109/Cracked Beams
• Increases the resistance of concrete to freeze and thaw cycles and de-icing salts