Sikadur Injection Gel High-Modulus High-Strength Structural Non-Abrasive Smooth Epoxy Paste Adhesive 4 Gallon
Brand
Sika Corporation
Item #
SIKA-107732
Mfr. Model #
107732
Product Description
![]()
Sikadur Injection Gel High-Modulus, High-Strength, Structural, Non-Abrasive, Smooth Epoxy Paste Adhesive, 4 Gallon
Sikadur Injection Gel, Standard Set is a 2-component, 100% solids, moisture-tolerant, high-modulus, high strength, structural epoxy. When mixed it gives a smooth, non-abrasive, paste adhesive. It conforms to the current ASTM C-881, Types I and IV, Grade-3, Class-C, and AASHTO M-235 specifications.
Uses:
- Structural crack repairs not exceeding 1/4 in. (6 mm) width.
- Mechanical grouting. . . bolts, dowels, pins, machine and ‘robotic’ base plates, bearing pads, etc.
- Waterproofing tunnels, cable vaults, tanks, basements, etc.
- Re-anchoring of veneer masonry. Consult a design professional prior to use.
- Wood-truss repairs.
- Preventive maintenance - grout large cracks on new or existing structures to seal off reinforcing steel from the elements of corrosion.
- Anchor grouting . . . bolts, dowels, pins and special fasteners. Consult a design professional prior to use.
- As a pick-proof sealant around windows, doors, lock-ups, etc. inside correctional facilities.
Characteristics and Advantages:
- Unique, non-abrasive texture permits application with automated pressure-injection equipment.
- Tolerant of moisture before, during, and after cure.
- Unique, non-abrasive texture permits application with automated pressure-injection equipment.
- Tolerant of moisture before, during, and after cure.
- Excellent adhesion to masonry, concrete, wood, steel and most structural materials.
- Paste consistency ideal for vertical and overhead grouting of cracks.
- Convenient easy mix ratio A:B = 1:1 by volume.
- Excellent lubricity for deep penetration.
- Sikadur Injection Gel fast set is approved for short term loads only. Consult a design professional prior to use.
- Structural crack repairs not exceeding 1/4 in. (6 mm) width.
- Mechanical grouting. . . bolts, dowels, pins, machine and ‘robotic’ base plates, bearing pads, etc.
Product Highlights
Sikadur Injection Gel, Standard Set is a 2-component, 100% solids, moisture-tolerant, high-modulus, high strength, structural epoxy.
Product Details
| Specification | Description |
|---|---|
| # of Components: | Two Component |
| Adhesive/Glue Type: | Epoxy & Structural Adhesives |
| Brand Name: | Sika Corporation |
| Brand Part Number: | 107732 |
| Class (ASTM C-881): | Class C - For Use Above 60°F |
| Color: | Gray |
| Compressive Strength: | Varies with Time & Temperature |
| Consistency: | Paste |
| Elongation at Break: | 0.013 |
| Flexural Strength: | 6,700 psi |
| Grade (ASTM C-881): | Grade 3 - Non Sag |
| Heat Deflection Temperature: | 120 °F |
| Model: | Sikadur Injection Gel |
| Modulus of Elasticity in Compression: | 2.7 x 10^5 psi |
| Modulus of Elasticity in Flexure: | 7.5 x 10^5 psi |
| Package Type: | Pail |
| Pot Life: | 30 Minutes |
| Primary Application: | Construction & Concrete |
| Shear Strength: | 3,700 psi |
| Shelf Life: | 730 Days |
| Size: | 4 Gallon |
| Specifications Met: | AASHTO M-235, ASTM C-881 Type I/IV Grade 3 Class C |
| Tensile Modulus of Elasticity: | 4.1 x 10^5 psi |
| Tensile Strength: | 4,300 psi |
| Type (ASTM C-881): | Type I - Bonding Hardened Concrete to Hardened Concrete (Non-Load Bearing), Type IV - Bonding Hardened Concrete to Hardened Concrete (Load Bearing) |
| Water Absorption: | 0.0011 |
Price
$375.79
/
each
