Sikacem 133 Machine-Applied Polymer-Modified Silica Fume Enhanced Cementitious Mortar 55lb Bag
Sika Corporation
Item #
SIKA-91077
Mfr. Model #
91077
Sikacem 133 Machine-Applied, Polymer-Modified, Silica Fume Enhanced, Cementitious Mortar, 55lb Bag
SikaCem®-133 is a high-performance, ready-to-use, non-accelerated, cementitious, polymer-modified, silica fume-enhanced mortar with a dust control agent. SikaCem®-133 is formulated for machine applications using dry or wet process shotcrete equipment.
Uses:
SikaCem®-133 is particularly suitable for structural repairs in large area applications; for structures such as bridges, viaducts, retaining walls, parking structures, tunnels, galleries, industrial and residential buildings, piers, off-shore platforms, etc.
- Use on grade, above, and below grade on concrete and mortar.
- Use on vertical, overhead, and horizontal surfaces.
Advantages:
- One-component, ready-to-use mortar.
- Excellent adhesion to currently prepared, sound substrates.
- High compressive and flexural strength, rapid strength development.
- Excellent freeze/thaw durability and resistance to deicing salts.
- Tested for application during dynamic load (under traffic conditions).
- Increased density and durability - can be used as a thin overlay for additional protection of reinforcement.
- High resistance to the diffusion of carbon dioxide (carbonation).
- Constant modulus of elasticity in a wide temperature range.
- Formulated to minimize dust formation.
- Low in rebound, extremely economical in use.
- Low water cement ratio, very low shrinkage.
- Can be troweled and screed after application.
$44.26
/
each
Expected to ship Fri. May 10