Sika Loadflex-524EZ Semi-Rigid, 2-Component Polyurethane Control Joint Filler, Part A, 5 Gallon

Sika Loadflex-524EZ Semi-Rigid, 2-Component Polyurethane Control Joint Filler, Part A, 5 Gallon

Sika® Loadflex-524 EZ is a technologically advanced, two-component, quick-setting, semi-rigid, solvent-free, self-leveling control joint filler.

Uses:

• Sika® Loadflex-524 EZ is recommended for use as filler for static interior, horizontal saw cuts, or preformed control and construction joints.
• Typically installed in facilities such as warehouses and industrial plants, where such joints are subject to loadbearing conditions involving wear and impact.
• Sika® Loadflex-524 EZ is also used for repairing interior concrete slabs that have experienced random cracking due to shrinkage.

Characteristics and Advantages:

• The quick-set formula reduces downtime.
• Material can be shaved off smoothly as early as 5 minutes or as late as 24 hours after placement at 73 °F (23 °C).
• Cures at temperatures down to -13 °F (-25 °C).
• Hard, load-bearing filler designed to withstand industrial traffic.
• Provides even load transfer across floor joints, thereby protecting joint edges from breaking down under traffic.
• Two components, easy to use, 1:1 mix ratio.
• Improved consistency to allow easier dispensing and reduced blockage of equipment.
• Seals joints from collecting dirt, dust, and debris.
• Excellent moisture sensitivity.
• For use in Food Plants where floor surfaces must be kept clean.