20 Amp, 125/250 Volt, IEC 309-1 & 309-2, 3P, 4W, Mechanical Interlock North American Pin & Sleeve Receptacle, Hub Sold Separately, Grade, IP67, Watertight, Non-Fused - ORANGE
Specification | Description | Item #: | LEV-420MI12W | Brand: | Leviton | MPN: | 420MI12W | UOM: | EA | UPC: | 078477130506 | Condition: | New | Amperage: | 20 Amp | Voltage: | 125/250 Volt | Pole: | 3 | Wire: | 4 | Current Interrupting: | Certified for current interrupting at full rated current | Endurance: | 6,000 cycles inductive motor type load | Dielectric Voltage: | 1000 V plus rated voltage for 1-minute | Flammability: | No 0.6; V-0 for watertight enclosure | Rain: | Type 3R per UL 50 | Hosedown: | Type 4X per UL 50 | Dust: | Type 12K per UL 50 | Gasket Aging: | 70C for 168 hours | UV Resistance: | Exposed plastic materials are UV stabilized | Operating Temperature: | -40C to 60C | Housing Material: | Valox 357 | Cover with Arm: | Valox 357 | Locking Ring: | Valox 357 | Cover Eyelet: | Nickel-Plated Brass | Gasket Material: | Chloroprene | Handle Material: | Valox 357 | Actuator Material: | Zinc-Coated Steel | Locking Mechanism: | Valox 357 | Contact Carrier: | Nylon | Phase and Ground Sleeves: | Brass | Ground Contacts: | Brass | Conduit Grounding Plate: | Zinc-Coated Steel | Switch Material: | Reinforced Nylon | Switch Terminal Contacts: | Brass | Switch Contacts: | Cadmium-Free Silver Alloy | Internal Screws: | Zinc-plated steel | Housing Screws: | Stainless Steel | Mold Stress Relief: | 70ºC for 7 hours | Crush Test: | 100 lbs | Impact: | 1.2 lb ball dropped from 5 ft | Strength of Insulating Base and : | 110% of specified tightening torque on terminal screws | Pullout: | 18 lb pull on internal wires | Color: | Orange | UL: | 231 & 1686 | UL 508: | Non-Fused | CSA: | C22.2 | CE Marking: | Per low voltage directives 73/23/EEC, 93/68/EEC | IEC Rating: | 60309-1 and 60309-2 | Warranty: | 2-Year Limited |
| |