Lutron RRD-HN6BRL-BL RadioRA 2 C.L Hybrid Keypad, 120V, Black
RadioRA 2 C.L Hybrid Keypad, 6-button with raise/lower keypad and 450W/450VA neutral wire dimmer (Incandescent/Halogen/Magnetic Low Voltage) or 100W (approved CFL/LED), 120V, in black
RadioRA® 2 C•L® Hybrid Keypads function as a dimmer and keypad combined into a single device. C•L® Hybrid Keypads are great for retrofit applications since they eliminate the need to install two separate devices.
C•L® Hybrid Keypads are neutral-wire controls that can be used with small loads, such as screw-in CFL/LED lamps. Normal keypad operation will be available even if the attached load is not installed or the lamp is burned out.
C•L® Hybrid Keypads can be controlled as part of a lighting control system and incorporate advanced features such as fade on/fade off and rapid full on.
C•L® Hybrid Keypads feature large, easy-to-use buttons, plus a unique backlit engraving option that makes them readable any time of the day or night. The C•L® Hybrid Keypad buttons are rounded, allowing engraving to be displayed at an upward angle, increasing readability. C•L® Hybrid Keypads include a Front Accessible Service Switch (FASSTM) for safe lamp replacement.
Use only Lutron® Designer (Claro® or Satin Colors®) wallplates. The mechanical design of the keypad is compatible with Lutron® wallplates ONLY and is NOT compatible with any other manufacturer’s wallplate. Wallplates are sold separately. Lutron® Claro® and Satin Colors® wallplates snap on with no visible means of attachment. Replacement Button Kits are available in a variety of colors and with custom engraving to identify clearly each button’s function.
C•L® Hybrid Keypads are designed for use with permanently installed incandescent, tungsten halogen, CFL/LED, magnetic low-voltage, or Lutron® Hi-lume® A-Series LTE LED drivers only
Design Features:
Keypad buttons are programmable to select scene or room preset levels or positions.
At the press of a keypad button, lights fade ON or OFF to desired levels and shades/ draperies open or close to desired positions.
Adjustable backlight intensity.
Internal dimmer is assigned to top button by default. Tap top button to toggle load ON/OFF.
Internal dimmer can be assigned to any button on the C•L® Hybrid Keypad and can be programmed to be controlled by any keypad.
Designed for use with a wide variety of approved LEDs.
Can be installed in either single location or multiple-location (with Remote Dimmer) installations.
We are searching 1000's of products for the best match...
Please Wait...
Searching...
We are isolating the categories and brands for the best match...
Pickup/Will Call Confirmation
By selecting Pickup/Will Call you acknowledge that you will be picking up your products at the EMI Supply Warehouse in Monroe, NC, and this order will NOT be shipped.