SikaBit S-60 Self-Adhering Sheet Waterproofing Membrane 3' x 66.7'

SIKA-474920
$179.95179.9500 USD New Available SIKA-474920 033886080941 474920
In Stock
Availability:
Usually ships within 24 hours
Item #
SIKA-474920
Brand :
Sika Corporation Sika Corporation
Unit Of Measure :
EA
UPC :
033886080941
MPN :
474920
Condition:
New

Product Details

SikaBit S-60 Self-Adhering Sheet Waterproofing Membrane 3' x 66.7'

Compares to Grace M3000

Sika AW Primer is highly suggested to be used in conjunction with SikaBit S-60

SikaBit® S-60 is a proprietary composite, uniquely designed to provide high strength, low-temperature adhesion, and high-temperature stability in a superior waterproofing membrane. A tough cross-laminated film forms a resilient barrier against physical damage and water migration. It is a cold-applied system requiring no heat or special equipment to install.

Use:

SikaBit® S-60 is ideal for waterproofing below-grade concrete, masonry structures, and wood surfaces where in-service temperatures will not exceed 130 °F (54 °C). It can also be applied to split slab construction both above and below grade as well as earth-sheltered structures.

Advantages:

  • Waterproof membrane, high hydrostatic head resistance
  • Easy to install, self-adhesive overlap ensures installation quality
  • Controlled thickness, minimizes the opportunity for job site error
  • Flexible handles shrinkage movement and minor settlement
  • The cross-Laminated film, has great stability, and resistance to puncture and tearing
  • Cold applied, no heat or flame necessary for installation

Surface Preparation - The surface must be clean, dry, free of voids, and structurally sound. Remove dust, laitance, grease, curing compounds, bond inhibiting impregnations, waxes, and any other contaminants. Concrete must be properly dried for a minimum of 7 days, ideally 14 days. If applying the membrane in less than 14 days, consult with Sika Technical Representative for a process for applying the membrane to green concrete. Repair any defects and remove sharp protrusions as well as form match lines.

Primers - Apply SikaBit® Primer AW by roller or sprayer at a rate of 450–500 ft2 /gal. Allow the primer to dry for one hour or until the primer is slightly tacky. Drying time may be longer in cooler temperatures. Reprime if the area is contaminated by dust or other debris, apply SikaBit® S-60 as soon as the primer is dry. NEVER apply primer directly to the SikaBit® S-60 membrane.

SpecificationDescription
Item #:SIKA-474920
Brand: Sika Corporation
MPN:474920
UOM:EA
UPC:033886080941
Condition:New

We Also Recommend :

Customers who bought this product also purchased