Mixing Tool Accessories

Egg Beater Mixer

Designed for plasters, adhesive mortars, mortars, tile adhesives, and fillers, best for sticky and viscous materials

Designed for plasters, adhesive mortars, mortars, tile adhesives, and fillers, best for sticky and viscous materials

Designed for paints, lacquers, thin coatings, and ready-mix plaster. Use on BN6169 or drill.

Designed for concrete, mortars, plasters, heat-insulating plasters, and epoxy resin with sand, best for heavy and high viscosity materials.

Designed for concrete, mortars, plasters, heat-insulating plasters, and epoxy resin with sand, best for heavy and high viscosity materials.

Designed for thinset, tile adhesive, grout, adhesive mortars, ready-mix mortars, pointing mortars, and fillers, best for small volumes on high-speed mixers.

Designed for thinset, tile adhesive, grout, adhesive mortars, ready-mix mortars, pointing mortars, and fillers, best for small volumes on high-speed mixers.

Designed for plasters, adhesive mortars, tile adhesive, and fillers, best for sticky and viscous materials.

Designed for fillers, bitumen coatings, joint cement, epoxy-resin compounds, and grouting compounds, best for prevention of lump formation and lessens adding air into the mixture.

Designed for fillers, bitumen coatings, joint cement, epoxy-resin compounds, and grouting compounds, best for prevention of lump formation and lessens adding air into the mixture.

Designed for gypsum-lime plaster, fibrated aluminum roof coatings, and paints. This paddle can be disassembled in two pieces and fit into a carrying case.

Designed for gypsum-lime plaster, fibrated aluminum roof coatings, and paints. This paddle can be disassembled in two pieces and fit into a carrying case.

Designed for concrete, cement, mortars, and grouts with aggregate less than 3/8" diameter. Also for gypsum lime plaster, fibrated aluminum roof coatings, and paints. Not for highly viscous materials. Sold in pairs for the double mixer.

This is a special paddle engineered for the BNR7000 Mixer. This single paddle turns in two directions at the same time.

CS Unitec PWP120 Mixing Paddle for Overlayments and Colored Products, 24" Long, 4.75" Dia.

CS Unitec WG 120 Helical Mixing Paddle, 4.5" dia. for Medium Viscosity Materials (for Mixer EHR 18 S)

CS Unitec RG 120 Helical Mixing Paddle, 4.5" dia. for Low Viscosity Materials (for Mixer EHR 18 S)

CS Unitec MG 120 Mortar Mixing Paddle, 4.5" dia. for Mortar & High Viscosity Materials (for Mixers EHR 20.1 R, 7 1111, 7 1112)

CS Unitec PWP140 Mixing Paddle for Overlayments and Colored Products, 24" Long, 5.5" Dia.

CS Unitec WG 135 Helical Mixing Paddle, 5.4" dia. for Medium Viscosity Materials (for Mixers EHR 20.1 R, 7 1111, 7 1112)

CS Unitec MG 140 Mortar Mixing Paddle, 5.4" dia. for Mortar & High Viscosity Materials (for Mixers EHR 20.1 R, 7 1111, 7 1112)

CS Unitec WG 160 Helical Mixing Paddle, 6.25" dia. for Medium Viscosity Materials (for Mixer EHR 23/1.4 R, 7 1113)

CS Unitec MG 160 Mortar Mixing Paddle, 6.25" dia. for Mortar & High Viscosity Materials (for Mixers EHR 23/1.4 R, 7 1113)

Portable Mixing Station Bucket w/Lid Only (22 gallon capacity)

CS Unitec TWP140 Mixing Paddle for Overlayments and Colored Products, 24" Long, 5.5" Dia.

CS Unitec TWP160 Mixing Paddle for Overlayments and Colored Products, 24" Long, 6.375" Dia.

CS Unitec MG 235 Mortar Mixing Paddle, 9.25" dia. for Mortar & High Viscosity Materials (for Mixers EHR 23/1.4 R)

CS Unitec MH 240 H Style Fold & Stir Blade (for Mixers EHR 20.1 R and EHR 23/1.4 R)

CS Unitec 31610000 Twin Mixer Paddle Set (for Mixer EZR 22 R/RL)

CS Unitec PH705 Mega Hippo Liner is a removable liner for quick cleanup.

CS Unitec PH400 F Series Caster Set w/Bolts for use on Mega Hippo PMH-80

CS Unitec PP600 Handheld Mixer Clamp for Pelican Cart

The BNMS-50 portable mixing stand is lightweight and folds-up and can be carried like a suitcase.

CS Unitec TW225 Mixing Paddle, Half Batch, 27" Long, 9" Helix, for Mega Hippo PMH 80 Mixer

CS Unitec TW225D Mixing Paddle, Full Batch, 27" Long, 9" Helix, for Mega Hippo PMH 80 Mixer, M16 Thread

CS Unitec PH500 X Series Wheel/Axle/Feet Set for use on Mega Hippo PMH-80

CS Unitec 25GP-WD Mixing Stand for Handheld Mixing Drills, 64 lbs.