| | WAL-13D009 | | Mandrels for double-sided knot-twisted mounted brushes - Fits with 13-C 304 | $2.37 | |
| | WAL-13D008 | | Mandrels for double-sided knot-twisted mounted brushes - Fits with 13-C 303 | $2.41 | |
| | CAR-60773 | | This wheel is designed to remove pinstripes, decals and molding adhesive without damage to the underlying surface. | $3.63 | |
| | CAR-63893 | | The 1/4" quick change mandrel is for use on automotive drills. | $3.93 | |
| | CAR-51776 | | Mandrel assembly will adapt the disc for use on portable tools. The assembly consists of a mandrel, nut, and two washers. | $5.64 | |
| | PFE-44830 | | Drive Arbor for POLIVLIES® Cross Buffs, 1/4" Shank x 3" Length - 8-32 Thd. | $6.77 | |
| | PFE-44060 | | Drive Arbor for POLISTAR Pads • 1/4" Shank, For 1/8" AH | $9.89 | |
| | PFE-42851 | | 1/4" Diameter - For 2" Discs | $9.92 | |
| | PFE-42852 | | 1/4" Diameter - For 3" Discs | $9.92 | |
| | WAL-11L002 | | Flush cut off wheel mandrels with 1/4" shaft for wheel thicknesses up to 1/2". | $11.81 | |
| | WAL-11L008 | | Flush cut off wheel mandrels with 1/4" shaft for wheel thicknesses up to 1/2". | $11.85 | |
| | PFE-69027 | | 3/8" Arbor Hole 3/4" Flange | $13.62 | |
| | WAL-11L004 | | Flush cut off wheel mandrels with 1/4" shaft for wheel thicknesses up to 1/2". | $13.66 | |
| | WAL-11L005 | | Flush cut off wheel mandrels with 5/16" shaft for wheel thicknesses up to 1/2". | $13.66 | |
| | PFE-69026 | | 1/4" Arbor Hole 3/4" Flange | $14.36 | |
| | PFE-69033 | | 1/4" Arbor Hole 1" Flange | $15.88 | |
| | PFE-69034 | | 3/8" Arbor Hole 1" Flange | $15.88 | |
| | PFE-44062 | | Arbors for POLISTAR-TUBE. 1/4” Shank Diameter. 0-3/8” Clamping Width. 4MM Bore. | $16.64 | |
| | PFE-44063 | | Arbors for POLISTAR-TUBE. 1/4” Shank Diameter. 0-3/8” Clamping Width. 5MM Bore. | $17.62 | |
| | WAL-30B061 | | Adaptor for shaft mounted abrasives. | $19.16 | |
| | PFE-69028 | | 1/4" and 3/8" Arbor Hole 3/4" Flange | $19.63 | |
| | WAL-11L001 | | Flush cut off wheel mandrels with 1/4" shaft for wheel thicknesses up to 1/8". | $20.32 | |
| | WAL-11L007 | | Flush cut off wheel mandrels with 1/4" shaft for wheel thicknesses up to 1/8". | $20.59 | |
| | PFE-69029 | | 1/4" Arbor Hole to 1/4" Shank | $20.63 | |
| | PFE-69035 | | 1/4" and 3/8" Arbor Hole 1" Flange | $20.80 | |
| | WAL-07X006 | | Mandrel for use on straight grinders and drills with 6" FX wheels - 1/4" shaft | $23.34 | |
| | PFE-69032 | | For 3/4" Bore 3/8" Shank | $24.38 | |
| | WAL-11L003 | | Flush cut off wheel mandrels with 1/4" shaft for wheel thicknesses up to 1/8". | $24.52 | |
| | WAL-11L006 | | Flush cut off wheel mandrels with 1/4" shaft for wheel thicknesses up to 1/8". | $24.52 | |
| | PFE-69031 | | For 3/4" Bore 1/4" Shank | $24.68 | |
| | WAL-07C006 | | Extention mandrels for use on angle grinders | $43.66 | |
| | CSU-47005 | | CS Unitec 47005 Rubber Expansion Roller. Use with sanding belts, fleece and felt sleeves. | $93.32 | |