| | | CAR-01132 | | Carborundum Premier Red 2-7/8" x 1/16" x 3/8" Value Cut-Off Wheel, 25,465RPM
Value cut-off wheels are good for sheet metal work, cutting clamps and rusted bolts. | $1.36 | |
| | | CAR-60773 | | Carborundum 3/8” Pin Stripe Removal Wheel Adapter for #67390
This wheel is designed to remove pinstripes, decals and molding adhesive without damage to the underlying surface. | $3.63 | |
| | | CAR-63893 | | Carborundum Carbo-Cut Adapter 1/4" Hex Mandrel
The 1/4" quick change mandrel is for use on automotive drills. | $3.93 | |
| | | CAR-29418 | | Carborundum PSA to Grip Conversion Pad, 6" Disc
Permanent adhesive on textile hook backing allows for low cost conversion of Stick-On pads to Grip-On. | $4.36 | |
| | | CAR-51776 | | Carborundum 3-1/16" x 1/4" Surface Strip Mandrel, Use w/39321
Mandrel assembly will adapt the disc for use on portable tools. The assembly consists of a mandrel, nut, and two washers. | $5.64 | |
| | | CAR-64024 | | Carborundum EZ-Wipe Micro Fiber Cloth 16" X 16"
Use with Carbo Finish Clean-Up/Detailer spray to easily clean up excess buffing residue and provide paint protection. | $5.71 | |
| | | CAR-54648 | | Carborundum Aluminum Oxide Resin Waterproof Cloth File Belt 3/8" X 13" P80Grit 10Pk
Designed for all metalworking, finishing and contour and shape sanding applications requiring flexibility and fray resistance | $5.81 | |
| | | CAR-63899 | | Carborundum Dual Density Wet Sanding Block
Because of the “grabbing” power of these blocks, no adhesive is required, simply wrap the paper around the block. | $6.64 | |
| | | CAR-99456 | | Carborundum Rubberized Undercoat, 20 oz. Can
Seals out rust, fumes, heat and cold, while protecting underbody areas. | $6.80 | This item cannot be shipped via air carrier |
| | | CAR-54663 | | Carborundum Aluminum Oxide Resin Waterproof Cloth File Belt 1/2" X 18" P80Grit 10Pk
Designed for all metalworking, finishing and contour and shape sanding applications requiring flexibility and fray resistance | $6.84 | |
| | | CAR-01881 | | Carborundum 3" Super Cut Wool Pad, Natural Wool Pad – Step 1
Engineered to work with Carbo Finish Extra-Cut polish or Mothers® compounds and polish, the 3" pads are perfect for quick spot repairs | $7.07 | |
| | | CAR-54662 | | Carborundum Aluminum Oxide Resin Waterproof Cloth File Belt 1/2" X 18" P60Grit 10Pk
Designed for all metalworking, finishing and contour and shape sanding applications requiring flexibility and fray resistance | $7.19 | |
| | | CAR-42089 | | Carborundum 6" Interface Pad, Foam Pad - Grip-On, 1/2" Thick
Constructed of soft, durable foam for use with Grip-On back-up pads. | $7.24 | |
| | | CAR-54647 | | Carborundum Aluminum Oxide Resin Waterproof Cloth File Belt 3/8" X 13" P60Grit 10Pk
Designed for all metalworking, finishing and contour and shape sanding applications requiring flexibility and fray resistance | $7.48 | |
| | | CAR-99457 | | Carborundum Carbon Black Guide Coat, 16 oz. Can
A quick and efficient method to find uneven and low spots on body filler, primer, glazing putties, and other repair components. | $7.96 | This item cannot be shipped via air carrier |
| | | CAR-21523 | | Carborundum Thin-Flex Discs, 6", Clear Blend Prep, Gold, 10PK
An incredibly flexible, yet strong product that is perfect for use on contoured surfaces and for getting into tight spaces. | $8.03 | |
| | | CAR-69934 | | Carborundum 3" Cutting Foam Pad, Medium Yellow Foam Pad – Step 2
Engineered to work with Carbo Finish Extra-Cut polish or Mothers® compounds and polish, the 3" pads are perfect for quick spot repairs | $8.53 | |
| | | CAR-69935 | | Carborundum 3" Finishing Foam Pad, Soft Black Foam Pad – Step 3
Engineered to work with Carbo Finish Extra-Cut polish or Mothers® compounds and polish, the 3" pads are perfect for quick spot repairs | $8.53 | |
| | | CAR-00906 | | Carborundum 6" x 3/8" Thick Soft Foam Grip-On Disc w/Strap
The 3/8" thick pad is composed of neoprene and foam, for excellent conformability. | $8.61 | |
| | | CAR-99370 | | Carborundum White Lightning Dri-Lube Stick-On Disc Roll, 6", P400B, 25/Roll
Ideal for sanding paint and primer. | $9.11 | |
| | | CAR-99371 | | Carborundum White Lightning Dri-Lube Stick-On Disc Roll, 6", P320B, 25/Roll
Ideal for sanding paint and primer. | $9.11 | |
| | | CAR-99372 | | Carborundum White Lightning Dri-Lube Stick-On Disc Roll, 6", P220B, 25/Roll
Ideal for sanding paint and primer. | $9.11 | |
| | | CAR-99373 | | Carborundum White Lightning Dri-Lube Stick-On Disc Roll, 6", P180B, 25/Roll
Ideal for sanding paint and primer. | $9.11 | |
| | | CAR-21524 | | Carborundum Thin-Flex Pads, 4-1/2" x 9", Clear Blend Prep, Gold, 10PK
An incredibly flexible, yet strong product that is perfect for use on contoured surfaces and for getting into tight spaces. | $9.30 | |
| | | CAR-63900 | | Carborundum EZ Block, Sanding Block w/Holes
A rugged, semi-rigid, multi-purpose sanding block engineered for flat to medium curved surfaces. | $9.97 | |
| | | CAR-30893 | | Carborundum 6" x 9" Clear Blend Prep, Fibratex Scuff Pad, Gold, Perforated, 10PK
Fibratex pads offer a consistently graded grain in an advanced resin system which provides a super fast cut without wild scratches. | $10.36 | |
| | | CAR-99376 | | Carborundum White Lightning Dri-Lube Stick-On Disc Roll, 6", P80B, 25/Roll
Ideal for sanding paint and primer. | $10.50 | |
| | | CAR-00904 | | Carborundum 6" Half Moon Grip-On Pad For 6" Grip-On Disc
The half moon pad uses a 6" Grip-On disc which adheres to the hooks on the pad face. | $11.43 | |
| | | CAR-63664 | | Carborundum Premier Red Stationary Belt, 6" x 48", Zirconia Alumina, 36 Grit
Stationary Sanding Belt, Width 6 Inch, Length 48 Inch, Zirconia Alumina Grain, Grit 36, Excellent for finishing wood and non-metallic applications. | $5.78 $11.55 | |
| | | CAR-12568 | | Carborundum 5/8"-11 Retainer Nut, For Fiber Discs
5/8"-11 Retainer Nut, For Fiber Discs | $11.89 | |
| | | CAR-99464 | | Carborundum White Lightning Stick-On Disc, 6", P80E, 25PK
Ideal for sanding paint and primer. Carbo White Lighting tough E-weight backing resists tearing and extends disc life. Ideal for sanding body filler. | $12.06 | |
| | | CAR-64922 | | Carborundum Back-Up Pad for Mini Flap Discs, 2" and 3" TR (Type lll), 30,000 rpm
Easy-on; easy off attachment for quick disc changes | $12.41 | |
| | | CAR-22538 | | Carborundum Carbo Fire TR+ Back-up Pad
Back-up pad for Carbo Fire surface strip TR+ discs | $12.46 | |
| | | CAR-70411 | | Carborundum 8" Super Cut Wool Pad, Buffing/Polishing, Use with 70414
These pads are engineered to work with Carbo Finish Extra-Cut Polish to achieve the optimal cut in the least amount of time while producing the best finish. | $12.56 | |
| | | CAR-54669 | | Carborundum Medalist Ceramic Alumina Waterproof Cloth File Belt with Grinding Aid 1/2" X 18" P80Grit 10Pk
The choice for hard-to-grind alloys and heat-sensitive applications. | $12.69 | |
| | | CAR-99455 | | Carborundum Premium Rubberized Undercoat, 24 oz. Can
Paintable and fast-drying rubberized undercoat for rust-prevention, sound deadening and chip resistance to fenders, undercarriages, quarter panels, wheel wells, decks, and hoods. | $12.86 | This item cannot be shipped via air carrier |
| | | CAR-99395 | | Carborundum White Lightning Dri-Lube Stick-On Body File Strip, 2-3/4" x 16-1/2", P80E, 25PK
Carbo White Lightning resists tearing and extends product life. Ideal for sanding body filler | $13.20 | |
| | | CAR-63897 | | Carborundum Sanding Block For Use with 6" Grip-On Discs, Ergonomic
The unique design quickly converts a 6" diameter hook and loop disc into a hand sander. | $13.27 | |
| | | CAR-63898 | | Carborundum Sanding Block For Use with 6" PSA Discs, Ergonomic
The unique design quickly converts a 6" diameter PSA into a hand sander. | $13.27 | |
| | | CAR-67381 | | Carborundum Double Sided Acrylic Attachment Tape, 1/4" x 20 yds., .045 thick, Gray
High-density gray foam tape coated with high strength acrylic adhesive on both sides and a red polyethylene release liner is designed for bonding medium to large moldings and accessories. | $13.64 | |
| | | CAR-70533 | | Carborundum Finish Clean Up/Detailer Spray, 32 oz/Qt.
The spray detailer easily cleans up excess buffing residue and provides paint protection. Just spray it on and wipe it off with the EZ Wipe Microfiber Cloth. | $13.74 | |
| | | CAR-64037 | | Carborundum Back-Up Pads For Flex-Loc TR Discs, 1" x ¼"
Flex-Loc TR are compatible with similar competitive attachment systems. | $14.26 | |
| | | CAR-00142 | | Carborundum White Aluminum Oxide Resin Fiber Disc 5" X 7/8" 80Grit 25Pk
Ideal for weld blending, deburring, stock removal, rust removal. | $11.14 $14.85 | |
| | | CAR-70412 | | Carborundum 9" Yellow Cutting Foam Pad, Buffing/Polishing, Use with 70414
These pads are engineered to work with Carbo Finish Extra-Cut Polish to achieve the optimal cut in the least amount of time while producing the best finish. | $15.07 | |
| | | CAR-70413 | | Carborundum 9" Black Finishing Foam Pad, Buffing/Polishing, Use with 70414
These pads are engineered to work with Carbo Finish Extra-Cut Polish to achieve the optimal cut in the least amount of time while producing the best finish. | $15.07 | |
| | | CAR-99460 | | Carborundum 8" Orange Foam Waffle Pad, Buffing/Polishing, Use with 70414
These pads are engineered to work with Carbo Finish Extra-Cut Polish to achieve the optimal cut in the least amount of time while producing the best finish. | $15.07 | |
| | | CAR-99461 | | Carborundum 8" Yellow Foam Waffle Pad, Buffing/Polishing, Use with 70414
These pads are engineered to work with Carbo Finish Extra-Cut Polish to achieve the optimal cut in the least amount of time while producing the best finish. | $15.07 | |
| | | CAR-99468 | | Carborundum 8" Black Foam Waffle Pad, Buffing/Polishing, Use with 70414
These pads are engineered to work with Carbo Finish Extra-Cut Polish to achieve the optimal cut in the least amount of time while producing the best finish. | $15.07 | |
| | | CAR-20435 | | Carborundum Surface Blending Disc 3" Very Fine Blue 25Bx
Excellent for cleaning, deburring, finishing, blending and removal of light rust and oxidation on all metals | $15.44 $15.44 | |
| | | CAR-70401 | | Carborundum Sanding Block 2-3/4" x 5" Soft Stick-On, Ergonomic
Constructed of flexible, yet tough, foam and shaped to fit comfortably in your hand. | $15.48 | |
| | | CAR-70402 | | Carborundum Sanding Block 2-3/4" x 5" Firm Stick-On, Ergonomic
Constructed of durable material and shaped to fit comfortably in your hand. | $15.48 | |
| | | CAR-53326 | | Carborundum White Lightning 6" Grip-On Disc, P80, 25PK
Ideal for sanding paint and primer. | $16.00 | |
| | | CAR-00140 | | Carborundum White Aluminum Oxide Resin Fiber Disc 5" X 7/8" 50Grit 25Pk
Ideal for weld blending, deburring, stock removal, rust removal. | $10.84 $16.10 | |
| | | CAR-20521 | | Carborundum 5" Interface Pad, Foam Pad - Grip-On, 3/4" Thick, 2PK
Constructed of soft, durable foam for use with Grip-On back-up pads. | $16.21 | |
| | | CAR-55103 | | Carborundum Back-Up Pads For Flex-Loc TR Discs, 2" x 1/4", 25,000 rpm
Flex-Loc TR are compatible with similar competitive attachment systems. | $16.36 | |
| | | CAR-99447 | | Carborundum Urethane Windshield Sealer-Black, 11 oz.
Carborundum Urethane Windshield Sealer-Black, 10.5 oz.
A one-part urethane adhesive sealant for windshield and backlite installations. | $16.44 | |
| | | CAR-70404 | | Carborundum Sanding Block 2-3/4" x 5" Firm Grip-On, Ergonomic
Constructed of durable material and shaped to fit comfortably in your hand. | $16.45 | |
| | | CAR-10898 | | Carborundum Gold Dri-Lube Clip-On Marine File Strips, 2-3/4" x 17-1/2", P180, 50PK
Ideal for blending and shaping all types of marine fillers. | $16.64 | |
| | | CAR-10899 | | Carborundum Gold Dri-Lube Clip-On Marine File Strips, 2-3/4" x 17-1/2", P150, 50PK
Ideal for blending and shaping all types of marine fillers. | $16.64 | |
| | | CAR-10900 | | Carborundum Gold Dri-Lube Clip-On Marine File Strips, 2-3/4" x 17-1/2", P120, 50PK
Ideal for blending and shaping all types of marine fillers. | $16.64 | |
| | | CAR-10902 | | Carborundum Gold Dri-Lube Clip-On Marine File Strips, 2-3/4" x 17-1/2", P100, 50PK
Ideal for blending and shaping all types of marine fillers. | $16.64 | |
| | | CAR-99454 | | Carborundum Rocker Panel Texture Coat-Black, 16 oz. Can
A rapid drying, flexible, abrasion resistant protective coating that can be varied to match OEM textures found on rocker panels and valances. | $16.79 | This item cannot be shipped via air carrier |
| | | CAR-99472 | | Carborundum White Lightning Dri-Lube Grip-On Body File Strip, 2-3/4" x 16-1/2", P180B, 25PK
Ideal for sanding paint and primer. Carbo White Lightning resists tearing and extends product life. Ideal for sanding body filler. | $16.83 | |
| | | CAR-99473 | | Carborundum White Lightning Dri-Lube Grip-On Body File Strip, 2-3/4" x 16-1/2", P220B, 25PK
Ideal for sanding paint and primer. Carbo White Lightning resists tearing and extends product life. Ideal for sanding body filler. | $16.83 | |
| | | CAR-53377 | | Carborundum Medalist Microfine Grip-On Foam Finishing Discs, 3", 3000 (Green), 6PK
Medalist Foam Finishing Discs, used moist, will produce a semi-polished surface that greatly reduces buffing time. | $16.86 | |
| | | CAR-54668 | | Carborundum Medalist Ceramic Alumina Waterproof Cloth File Belt with Grinding Aid 1/2" X 18" P60Grit 10Pk
The choice for hard-to-grind alloys and heat-sensitive applications. | $17.49 | |
| | | CAR-54666 | | Carborundum Medalist Ceramic Alumina Waterproof Cloth File Belt with Grinding Aid 1/2" X 18" P40Grit 10Pk
The choice for hard-to-grind alloys and heat-sensitive applications. | $17.67 | |
| | | CAR-10904 | | Carborundum Clip-On Marine File Strips, 2-3/4" x 17-1/2", Aluminum Oxide, P100, 50PK
Ideal for blending and shaping all types of marine fillers. | $17.86 | |
| | | CAR-45600 | | Carborundum Fibratex Non-Abrasive Hand Pad 6 X 9 White 10Bx
Fibratex non-woven abrasive hand pads from Carborundum Abrasives, offer a complete choice of products for applications ranging from non-abrasive polishing to aggressive, heavy duty cleaning and blending. | $17.92 | |
| | | CAR-18626 | | Carborundum Premier Red Flap Disc, 5" x 7/8, 80 Grade
Ideal for metal grinding or polishing, especially for weld bead grinding on fine carbon and stainless steel. | $17.99 | |
| | | CAR-18627 | | Carborundum Premier Red Flap Disc, 5" x 7/8", 60 Grade
Ideal for metal grinding or polishing, especially for weld bead grinding on fine carbon and stainless steel. | $17.99 | |
| | | CAR-18628 | | Carborundum Premier Red Flap Disc, 5" x 7/8", 40 Grade
Ideal for metal grinding or polishing, especially for weld bead grinding on fine carbon and stainless steel. | $17.99 | |
| | | CAR-18629 | | Carborundum Premier Red Flap Disc, 5" x 7/8", 36 Grade
Ideal for metal grinding or polishing, especially for weld bead grinding on fine carbon and stainless steel. | $17.99 | |
| | | CAR-99425 | | Carborundum Fibratex Thin-Flex Pads, 4-1/2" x 9" Primer Prep Pad, Maroon 25PK
An incredibly flexible, yet strong product that is perfect for use on contoured surfaces and for getting into tight spaces | $17.99 | |
| | | CAR-99413 | | Carborundum White Lightning Dri-Lube Grip-On Disc, 6", P800B, 50PK
Ideal for sanding paint and primer. Hook and loop backing provides extra cushioning and air flow for a cooler cut plus extended disc life. | $18.06 | |
| | | CAR-99414 | | Carborundum White Lightning Dri-Lube Grip-On Disc, 6", P600B, 50PK
Ideal for sanding paint and primer. Hook and loop backing provides extra cushioning and air flow for a cooler cut plus extended disc life. | $18.06 | |
| | | CAR-99416 | | Carborundum White Lightning Dri-Lube Grip-On Disc, 6", P400B, 50PK
Ideal for sanding paint and primer. Hook and loop backing provides extra cushioning and air flow for a cooler cut plus extended disc life. | $18.06 | |
| | | CAR-99417 | | Carborundum White Lightning Dri-Lube Grip-On Disc, 6", P320B, 50PK
Ideal for sanding paint and primer. Hook and loop backing provides extra cushioning and air flow for a cooler cut plus extended disc life. | $18.06 | |
| | | CAR-99418 | | Carborundum White Lightning Dri-Lube Grip-On Disc, 6", P220B, 50PK
Ideal for sanding paint and primer. Hook and loop backing provides extra cushioning and air flow for a cooler cut plus extended disc life. | $18.06 | |
| | | CAR-99419 | | Carborundum White Lightning Dri-Lube Grip-On Disc, 6", P180B, 50PK
Ideal for sanding paint and primer. Hook and loop backing provides extra cushioning and air flow for a cooler cut plus extended disc life. | $18.06 | |
| | | CAR-99420 | | Carborundum White Lightning Dri-Lube Grip-On Disc, 6", P150B, 50PK
Ideal for sanding paint and primer. Hook and loop backing provides extra cushioning and air flow for a cooler cut plus extended disc life. | $18.06 | |
| | | CAR-99421 | | Carborundum White Lightning Dri-Lube Grip-On Disc, 6", P120B, 50PK
Ideal for sanding paint and primer. Hook and loop backing provides extra cushioning and air flow for a cooler cut plus extended disc life. | $18.06 | |
| | | CAR-70406 | | Carborundum Sanding Block 2-3/4" x 7-3/4" Firm Grip-On, Ergonomic
Constructed of durable material and shaped to fit comfortably in your hand. | $18.30 | |
| | | CAR-09975 | | Carborundum 6" x 3/4" x 1" Bench/Pedestal Wheel, Aluminum Oxide, Medium, 4,140 rpm
Ideal for removing burrs on steel parts, as well as sharpening high-speed steel cutting tools. | $18.53 | |
| | | CAR-09976 | | Carborundum 6" x 3/4" x 1" Bench/Pedestal Wheel, Aluminum Oxide, Coarse, 4,140 rpm
Ideal for removing burrs on steel parts, as well as sharpening high-speed steel cutting tools. | $18.70 | |
| | | CAR-99309 | | Carborundum Back-Up Pads - Medium Low Profile PSA, 5", 15,000 rpm
Two back-up pad profiles and two densities give you all the options you need for any sanding job. | $18.79 | |
| | | CAR-53330 | | Carborundum 2-3/4" x 16-1/2" Grip-On Body File Sheets, White Lightning, P80E, 25PK
Ideal for sanding paint and primer. | $19.07 | |
| | | CAR-99469 | | Carborundum White Lightning Dri-Lube Grip-On Body File Strip, 2-3/4" x 16-1/2", P80B, 25PK
Ideal for sanding paint and primer. Carbo White Lightning resists tearing and extends product life. Ideal for sanding body filler. | $19.07 | |
| | | CAR-10903 | | Carborundum Gold Dri-Lube Clip-On Marine File Strips, 2-3/4" x 17-1/2", P80, 50PK
Ideal for blending and shaping all types of marine fillers. | $19.09 | |
| | | CAR-99306 | | Carborundum Back-Up Pads - Soft Low Profile Grip-On, 3", 12,000 rpm
Two back-up pad profiles and two densities give you all the options you need for any sanding job. | $19.31 | |
| | | CAR-70405 | | Carborundum Sanding Block 2-3/4" x 7-3/4" Firm Stick-On, Ergonomic
Constructed of durable material and shaped to fit comfortably in your hand. | $19.34 | |
| | | CAR-99450 | | Carborundum Urethane Seam Sealer, 10.3 oz., Use with Application Gun #82786
A one-component, polyurethane seam sealer that cures quickly to a permanent, flexible sealant designed for sealing interior and exterior automotive and RV body joints and seams and duplicates OEM appearance. | $19.34 | |
| | | CAR-99394 | | Carborundum White Lightning Dri-Lube Stick-On Body File Strip, 2-3/4" x 16-1/2", P40E, 25PK
Carbo White Lightning resists tearing and extends product life. Ideal for sanding body filler | $19.59 | |
| | | CAR-10905 | | Carborundum Clip-On Marine File Strips, 2-3/4" x 17-1/2", Aluminum Oxide, P80, 50PK
Ideal for blending and shaping all types of marine fillers. | $19.63 | |
| | | CAR-20520 | | Carborundum 6" Interface Pad, Foam Pad - Grip-On, 3/4" Thick, 2PK
Constructed of soft, durable foam for use with Grip-On back-up pads. | $19.63 | |
| | | CAR-99426 | | Carborundum Fibratex Thin-Flex Pads, 4-1/2" x 9" Color Prep Pad, Grey, 25PK
An incredibly flexible, yet strong product that is perfect for use on contoured surfaces and for getting into tight spaces | $19.90 | |
| | | CAR-99343 | | Carborundum White Lightning Dri-Lube Stick-On Sheet Rolls, 2-3/4" x 25 yds., P400B
Pressure Sensitive Adhesive (PSA) Sheet Rolls can be easily cut to any length to stick onto a hand sanding block, file board, or file shoe. | $20.20 | |
| | | CAR-99344 | | Carborundum White Lightning Dri-Lube Stick-On Sheet Rolls, 2-3/4" x 25 yds., P320B
Pressure Sensitive Adhesive (PSA) Sheet Rolls can be easily cut to any length to stick onto a hand sanding block, file board, or file shoe. | $20.20 | |
| | | CAR-99345 | | Carborundum White Lightning Dri-Lube Stick-On Sheet Rolls, 2-3/4" x 25 yds., P220B
Pressure Sensitive Adhesive (PSA) Sheet Rolls can be easily cut to any length to stick onto a hand sanding block, file board, or file shoe. | $20.20 | |
| | | CAR-99346 | | Carborundum White Lightning Dri-Lube Stick-On Sheet Rolls, 2-3/4" x 25 yds., P180B
Pressure Sensitive Adhesive (PSA) Sheet Rolls can be easily cut to any length to stick onto a hand sanding block, file board, or file shoe. | $20.20 | |
| | | CAR-99347 | | Carborundum White Lightning Dri-Lube Stick-On Sheet Rolls, 2-3/4" x 25 yds., P150B
Pressure Sensitive Adhesive (PSA) Sheet Rolls can be easily cut to any length to stick onto a hand sanding block, file board, or file shoe. | $20.20 | |
| | | CAR-99348 | | Carborundum White Lightning Dri-Lube Stick-On Sheet Rolls, 2-3/4" x 25 yds., P120B
Pressure Sensitive Adhesive (PSA) Sheet Rolls can be easily cut to any length to stick onto a hand sanding block, file board, or file shoe. | $20.20 | |
| | | CAR-67390 | | Carborundum Pin Stripe Removal Wheel 4" x 5/8" x 5/16"-24, 4,000 rpm
This wheel is designed to remove pinstripes, decals and molding adhesive without damage to the underlying surface. | $20.21 | |
| | | CAR-99453 | | Carborundum Rocker Panel Texture Coat-White, 16 oz. Can
A rapid drying, flexible, abrasion resistant protective coating that can be varied to match OEM textures found on rocker panels and valances. | $20.37 | This item cannot be shipped via air carrier |
| | | CAR-99422 | | Carborundum White Lightning Dri-Lube Grip-On Disc, 6", P80B, 50PK
Ideal for sanding paint and primer. Hook and loop backing provides extra cushioning and air flow for a cooler cut plus extended disc life. | $20.66 | |
| | | CAR-10890 | | Carborundum 6" x 9" Primer Prep, Fibratex Scuff Pad, Maroon, Perforated, 20PK
Fibratex pads offer a consistently graded grain in an advanced resin system which provides a super fast cut without wild scratches. | $20.70 | |
| | | CAR-10891 | | Carborundum 6" x 9" Color Prep, Fibratex Scuff Pad, Grey, Perforated, 20PK
Fibratex pads offer a consistently graded grain in an advanced resin system which provides a super fast cut without wild scratches. | $20.70 | |
| | | CAR-10892 | | Carborundum 6" x 9" Non-Abrasive, Fibratex Scuff Pad, White, 20PK
Fibratex pads offer a consistently graded grain in an advanced resin system which provides a super fast cut without wild scratches. | $20.70 | |
| | | CAR-53389 | | Carborundum Fibratex Thin-Flex Discs 6" Primer Prep, Maroon, 25PK
An incredibly flexible, yet strong product that is perfect for use on contoured surfaces and for getting into tight spaces. | $20.77 | |
| | | CAR-53390 | | Carborundum Fibratex Thin-Flex Discs 6" Color Prep, Grey, 25PK
An incredibly flexible, yet strong product that is perfect for use on contoured surfaces and for getting into tight spaces. | $20.77 | |
| | | CAR-53395 | | Carborundum Attachment Tape Adhesion Promoter, 4 fl.oz.
Carbo Attachment Tape Adhesion Promoter is a liquid primer to improve the adhesion of Carbo automotive attachment tapes | $20.90 | |
| | | CAR-09974 | | Carborundum 6" x 3/4" x 1" Bench/Pedestal Wheel, Aluminum Oxide, Fine, 4,140 rpm
Ideal for removing burrs on steel parts, as well as sharpening high-speed steel cutting tools. | $21.16 | |
| | | CAR-09971 | | Carborundum 6" x 1" x 1" Bench/Pedestal Wheel, Aluminum Oxide, Fine, 4,140 rpm
Ideal for removing burrs on steel parts, as well as sharpening high-speed steel cutting tools. | $21.38 | |
| | | CAR-70403 | | Carborundum Sanding Block 2-3/4" x 5" Soft Grip-On, Ergonomic
Constructed of flexible, yet tough, foam and shaped to fit comfortably in your hand. | $21.53 | |
| | | CAR-09973 | | Carborundum 6" x 1" x 1" Bench/Pedestal Wheel, Aluminum Oxide, Coarse, 4,140 rpm
Ideal for removing burrs on steel parts, as well as sharpening high-speed steel cutting tools. | $21.58 | |
| | | CAR-99393 | | Carborundum White Lightning Dri-Lube Stick-On Body File Strip, 2-3/4" x 16-1/2", P36E, 25PK
Carbo White Lightning resists tearing and extends product life. Ideal for sanding body filler | $21.74 | |
| | | CAR-63500 | | Carborundum Fibratex Silicon Carbide UltraFine Hand Pad 6X9 Gray 20Bx
Fibratex non-woven abrasive hand pads from Carborundum Abrasives, offer a complete choice of products for applications ranging from non-abrasive polishing to aggressive, heavy duty cleaning and blending. | $16.52 $22.02 | |
| | | CAR-62970 | | Carborundum Premier Red E-Zview Flex-Loc Fiber Discs, 5", ZA/Ceramic, 80 Grade, 10PK
Ideal for heavy duty grinding of welds, gates, risers and parting lines on castings and carbon steels. | $22.07 | |
| | | CAR-55105 | | Carborundum Back-Up Pads For Flex-Loc TR Discs, 3" x 1/4", 20,000 rpm
Flex-Loc TR are compatible with similar competitive attachment systems. | $22.21 | |
| | | CAR-99463 | | Carborundum White Lightning Stick-On Disc, 6", P40E, 25PK
Ideal for sanding paint and primer. Carbo White Lighting tough E-weight backing resists tearing and extends disc life. Ideal for sanding body filler. | $22.57 | |
| | | CAR-99317 | | Carborundum Back-Up Pads - Medium Tapered PSA, 5", 15,000 rpm
Two back-up pad profiles and two densities give you all the options you need for any sanding job. | $22.87 | |
| | | CAR-99427 | | Carborundum Premier Red Dri-Lube Grip-On Disc, 3", P120B, 50PK
Hook and loop backing provides extra cushioning and air flow for a cooler cut and extended disc life. | $22.89 | |
| | | CAR-99428 | | Carborundum Premier Red Dri-Lube Grip-On Disc, 3", P150B, 50PK
Hook and loop backing provides extra cushioning and air flow for a cooler cut and extended disc life. | $22.89 | |
| | | CAR-99429 | | Carborundum Premier Red Dri-Lube Grip-On Disc, 3", P220B, 50PK
Hook and loop backing provides extra cushioning and air flow for a cooler cut and extended disc life. | $22.89 | |
| | | CAR-99430 | | Carborundum Premier Red Dri-Lube Grip-On Disc, 3", P400B, 50PK
Hook and loop backing provides extra cushioning and air flow for a cooler cut and extended disc life. | $22.89 | |
| | | CAR-69926 | | Carborundum Premier Red Hook & Loop Grip-on Disc 3" P1000 50Bx
Abrasive Disc, Hook & Loop, 3" Diameter, P-Graded, Heat Treated, Aluminum Oxide, 1000 Grit, Premier Red, B Weight, Latex-Saturated Backing, B 0712 DO | $23.23 | |
| | | CAR-53327 | | Carborundum White Lightning 6" Grip-On Disc, P40, 25PK
Ideal for sanding paint and primer. | $23.47 | |
| | | CAR-10545 | | Carborundum Gold PSA Stik-On Paper Discs 5" P400 100Roll
Paper Disc, Pressure Sensitive Adhesive, 5 Inch Diameter, Grit P400, CAP Code C 0712 DO, P-Graded Aluminum Oxide, C-Weight Backing, Link Disc Roll, 100 Discs Per Roll | $23.49 | |
| | | CAR-10546 | | Carborundum Gold PSA Stik-On Paper Discs 5" P320 100Roll
Paper Disc, Pressure Sensitive Adhesive, 5 Inch Diameter, Grit P320, CAP Code C 0712 DO, P-Graded Aluminum Oxide, C-Weight Backing, Link Disc Roll, 100 Discs Per Roll | $23.49 | |
| | | CAR-10548 | | Carborundum Gold PSA Stik-On Paper Discs 5" P240 100Roll
Paper Disc, Pressure Sensitive Adhesive, 5 Inch Diameter, Grit P240, CAP Code C 0712 DO, P-Graded Aluminum Oxide, C-Weight Backing, Link Disc Roll, 100 Discs Per Roll | $23.49 | |
| | | CAR-10549 | | Carborundum Gold PSA Stik-On Paper Discs 5" P220 100Roll
Paper Disc, Pressure Sensitive Adhesive, 5 Inch Diameter, Grit P220, CAP Code C 0712 DO, P-Graded Aluminum Oxide, C-Weight Backing, Link Disc Roll, 100 Discs Per Roll | $23.49 | |
| | | CAR-10550 | | Carborundum Gold PSA Stik-On Paper Discs 5" P180 100Roll
Paper Disc, Pressure Sensitive Adhesive, 5 Inch Diameter, Grit P180, CAP Code C 0712 DO, P-Graded Aluminum Oxide, C-Weight Backing, Link Disc Roll, 100 Discs Per Roll | $23.49 | |
| | | CAR-10552 | | Carborundum Gold PSA Stik-On Paper Discs 5" P150 100Roll
Paper Disc, Pressure Sensitive Adhesive, 5 Inch Diameter, Grit P150, CAP Code C 0712 DO, P-Graded Aluminum Oxide, C-Weight Backing, Link Disc Roll, 100 Discs Per Roll | $23.49 | |
| | | CAR-10553 | | Carborundum Gold PSA Stik-On Paper Discs 5" P120 100Roll
Paper Disc, Pressure Sensitive Adhesive, 5 Inch Diameter, Grit P120, CAP Code C 0712 DO, P-Graded Aluminum Oxide, C-Weight Backing, Link Disc Roll, 100 Discs Per Roll | $23.49 | |
| | | CAR-18617 | | Carborundum Premier Red Zirconia Alumina Resin Cloth Flap Disc 4" X 5/8" Type 29 36Grit 5Pk
Ideal for metal grinding and polishing, especially for weld bead grinding on fine carbon and stainless steel. | $23.74 | |
| | | CAR-18616 | | Carborundum Premier Red Zirconia Alumina Resin Cloth Flap Disc 4" X 5/8" Type 29 40Grit 5Pk
Ideal for metal grinding and polishing, especially for weld bead grinding on fine carbon and stainless steel. | $23.74 | |
| | | CAR-18613 | | Carborundum Premier Red Zirconia Alumina Resin Cloth Flap Disc 4" X 5/8" Type 29 80Grit 5Pk
Ideal for metal grinding and polishing, especially for weld bead grinding on fine carbon and stainless steel. | $23.74 | |
| | | CAR-99304 | | Carborundum Back-Up Pads - Soft Low Profile PSA, 5", 12,000 rpm
Two back-up pad profiles and two densities give you all the options you need for any sanding job. | $23.83 | |
| | | CAR-62969 | | Carborundum Premier Red E-Zview Flex-Loc Fiber Discs, 5", ZA/Ceramic, 60 Grade, 10PK
Ideal for heavy duty grinding of welds, gates, risers and parting lines on castings and carbon steels. | $24.00 | |
| | | CAR-99462 | | Carborundum White Lightning Stick-On Disc, 6", P36E, 25PK
Ideal for sanding paint and primer. Carbo White Lighting tough E-weight backing resists tearing and extends disc life. Ideal for sanding body filler. | $24.31 | |
| | | CAR-20619 | | Carborundum Premier Red Dri-Lube PSA Disc Roll, 3-1/2", P220B, 100Roll
Best choice for sanding all paints, primers, plastics and fiberglass. Also suited for sealer and wash coats in wood furniture. | $24.51 | |
| | | CAR-69927 | | Carborundum Premier Red Hook & Loop Grip-on Disc 3" P1500 50Bx
Abrasive Disc, Hook & Loop, 3" Diameter, P-Graded, Heat Treated, Aluminum Oxide, 1500 Grit, Premier Red, B Weight, Latex-Saturated Backing, B 0712 DO | $24.52 | |
| | | CAR-70020 | | Carborundum Premier Red Hook & Loop Grip-on Disc 3" P180 50Bx
Abrasive Disc, Hook & Loop, 3" Diameter, P-Graded, Heat Treated, Aluminum Oxide, 180 Grit, Premier Red, B Weight, Latex-Saturated Backing, B 0912 DO | $24.52 | |
| | | CAR-70021 | | Carborundum Premier Red Hook & Loop Grip-on Disc 3" P320 50Bx
Abrasive Disc, Hook & Loop, 3" Diameter, P-Graded, Heat Treated, Aluminum Oxide, 320 Grit, Premier Red, B Weight, Latex-Saturated Backing, B 0912 DO | $24.52 | |
| | | CAR-70022 | | Carborundum Premier Red Hook & Loop Grip-on Disc 3" P800 50Bx
Abrasive Disc, Hook & Loop, 3" Diameter, P-Graded, Heat Treated, Aluminum Oxide, 800 Grit, Premier Red, B Weight, Latex-Saturated Backing, B 0712 DO | $24.52 | |
| | | CAR-70548 | | Carborundum 5" White Lightning Dri-Lube Stick-On Disc Roll, P120B, 100/RL
Ideal for sanding paint and primer. Pressure Sensitive Adhesive (PSA) backing. | $24.60 | |
| | | CAR-70550 | | Carborundum 5" White Lightning Dri-Lube Stick-On Disc Roll, P180B, 100/RL
Ideal for sanding paint and primer. Pressure Sensitive Adhesive (PSA) backing. | $24.60 | |
| | | CAR-70551 | | Carborundum 5" White Lightning Dri-Lube Stick-On Disc Roll, P220B, 100/RL
Ideal for sanding paint and primer. Pressure Sensitive Adhesive (PSA) backing. | $24.60 | |
| | | CAR-70553 | | Carborundum 5" White Lightning Dri-Lube Stick-On Disc Roll, P320B, 100/RL
Ideal for sanding paint and primer. Pressure Sensitive Adhesive (PSA) backing. | $24.60 | |
| | | CAR-18615 | | Carborundum Premier Red Zirconia Alumina Resin Cloth Flap Disc 4" X 5/8" Type 29 60Grit 5Pk
Ideal for metal grinding and polishing, especially for weld bead grinding on fine carbon and stainless steel. | $24.70 | |
| | | CAR-09972 | | Carborundum 6" x 1" x 1" Bench/Pedestal Wheel, Aluminum Oxide, Medium, 4,140 rpm
Ideal for removing burrs on steel parts, as well as sharpening high-speed steel cutting tools. | $24.92 | |
| | | CAR-09268 | | Carborundum Gold Cut-Off Wheel 3x.035x3/8 A60-OBFTK 25Bx
Cut Off Wheel, Carbo Gold, 3 Inch Diameter, .035 Thickness, 3/8 Arbor Hole, Aluminum Oxide Abrasive Grain, A60-OBFTK, Max RPM 24445, For use cutting ferrous metals, alloy steel and cast iron. | $24.99 | |
| | | CAR-20115 | | Carborundum Gold Aluminum Oxide Dri-Lube Resin Paper Open Grip-On Disc 5" X 0" P320 100Pk
Ideal for sanding paints, primers, plastics and fiberglass, as well as whitewood sanding, clean-up and repair. | $25.19 | |
| | | CAR-21342 | | Carborundum Premier Red Grip-On Body File Strip, 2-3/4" x 16-1/2", 80E, 25PK
The self-sharpening zirconia alumina grain improves cut rate, minimizes loading and reduces heat | $25.20 | |
| | | CAR-99349 | | Carborundum White Lightning Dri-Lube Stick-On Sheet Rolls, 2-3/4" x 25 yds., P80B
Pressure Sensitive Adhesive (PSA) Sheet Rolls can be easily cut to any length to stick onto a hand sanding block, file board, or file shoe. | $25.23 | |
| | | CAR-70019 | | Carborundum Premier Red Hook & Loop Grip-on Disc 3" P80 50Bx
Abrasive Disc, Hook & Loop, 3" Diameter, P-Graded, Heat Treated, Aluminum Oxide, 80 Grit, Premier Red, B Weight, Latex-Saturated Backing, B 0912 DO | $25.43 | |
| | | CAR-10555 | | Carborundum Gold PSA Stik-On Paper Discs 5" P80 100Roll
Paper Disc, Pressure Sensitive Adhesive, 5 Inch Diameter, Grit P80, CAP Code C 0712 DO, P-Graded Aluminum Oxide, C-Weight Backing, Link Disc Roll, 100 Discs Per Roll | $25.63 | |
| | | CAR-99459 | | Carborundum Panel & Adhesive Cleaner, Quart Can, 32 oz.
Removes adhesives, tar, grease, wax, body sealers, undercoating sprays, and silicone from most surfaces. | $25.64 | |
| | | CAR-09262 | | Carborundum Gold Cut-Off Wheel 3x1/16x3/8 A60-OBFTK 25Bx
Cut Off Wheel, Carbo Gold, 3 Inch Diameter, 1/16 Thickness, 3/8 Arbor Hole, Aluminum Oxide Abrasive Grain, A60-OBFTK, Max RPM 24445, For use cutting ferrous metals, alloy steel and cast iron. | $12.90 $25.80 | |
| | | CAR-09263 | | Carborundum Gold Cut-Off Wheel 3x1/16x3/8 A36-TBFW 25Bx
Cut Off Wheel, Carbo Gold, 3 Inch Diameter, 1/16 Thickness, 3/8 Arbor Hole, Aluminum Oxide Abrasive Grain, A36-TBFW, Max RPM 24445, For use cutting ferrous metals, alloy steel and cast iron. | $25.80 | |
| | | CAR-10554 | | Carborundum Gold PSA Stik-On Paper Discs 5" P100 100Roll
Paper Disc, Pressure Sensitive Adhesive, 5 Inch Diameter, Grit P100, CAP Code C 0712 DO, P-Graded Aluminum Oxide, C-Weight Backing, Link Disc Roll, 100 Discs Per Roll | $26.08 | |
| | | CAR-09964 | | Carborundum 7" x 1" x 1" Bench/Pedestal Wheel, Aluminum Oxide, Fine, 3,600 rpm
Ideal for removing burrs on steel parts, as well as sharpening high-speed steel cutting tools. | $26.09 | |
| | | CAR-70547 | | Carborundum 5" White Lightning Dri-Lube Stick-On Disc Roll, P100B, 100/RL
Ideal for sanding paint and primer. Pressure Sensitive Adhesive (PSA) backing. | $26.17 | |
| | | CAR-70554 | | Carborundum 5" White Lightning Dri-Lube Stick-On Disc Roll, P400B, 100/RL
Ideal for sanding paint and primer. Pressure Sensitive Adhesive (PSA) backing. | $26.17 | |
| | | CAR-99564 | | Carborundum Medalist Dri-Lube Grip-On Sheet Roll, 2-3/4" x 13 yds., P320B
Continuous perforated rolls made from high performance, ceramic grain minimize excess waste for board file papers. | $26.17 | |
| | | CAR-99565 | | Carborundum Medalist Dri-Lube Grip-On Sheet Roll, 2-3/4" x 13 yds., P220B
Continuous perforated rolls made from high performance, ceramic grain minimize excess waste for board file papers. | $26.17 | |
| | | CAR-99566 | | Carborundum Medalist Dri-Lube Grip-On Sheet Roll, 2-3/4" x 13 yds., P180B
Continuous perforated rolls made from high performance, ceramic grain minimize excess waste for board file papers. | $26.17 | |
| | | CAR-99567 | | Carborundum Medalist Dri-Lube Grip-On Sheet Roll, 2-3/4" x 13 yds., P150B
Continuous perforated rolls made from high performance, ceramic grain minimize excess waste for board file papers. | $26.17 | |
| | | CAR-99568 | | Carborundum Medalist Dri-Lube Grip-On Sheet Roll, 2-3/4" x 13 yds., P120C
Continuous perforated rolls made from high performance, ceramic grain minimize excess waste for board file papers. | $26.17 | |
| | | CAR-99590 | | Carborundum Medalist Dri-Lube Grip-On Sheet Roll, 2-3/4" x 13 yds., P400B
Continuous perforated rolls made from high performance, ceramic grain minimize excess waste for board file papers. | $26.17 | |
| | | CAR-99591 | | Carborundum Medalist Dri-Lube Grip-On Sheet Roll, 2-3/4" x 13 yds., P500B
Continuous perforated rolls made from high performance, ceramic grain minimize excess waste for board file papers. | $26.17 | |
| | | CAR-99592 | | Carborundum Medalist Dri-Lube Grip-On Sheet Roll, 2-3/4" x 13 yds., P600B
Continuous perforated rolls made from high performance, ceramic grain minimize excess waste for board file papers. | $26.17 | |
| | | CAR-21345 | | Carborundum Premier Red Grip-On Vacuum Body File Strip, 2-3/4" x 16", 80E, 25PK
The self-sharpening zirconia alumina grain improves cut rate, minimizes loading and reduces heat | $26.33 | |
| | | CAR-10875 | | Carborundum 9" x 11" Paper Sheet, Aluminum Oxide, P40, 25Pk
Ideal for general-duty dry sanding of paint, primers, light metals and woods. | $26.50 | |
| | | CAR-99315 | | Carborundum Back-Up Pads - Medium Low Profile Grip-On, 6", 15,000 rpm
Two back-up pad profiles and two densities give you all the options you need for any sanding job. | $26.70 | |
| | | CAR-99321 | | Carborundum Back-Up Pads - Medium Tapered Grip-On, 5", 15,000 rpm
Two back-up pad profiles and two densities give you all the options you need for any sanding job. | $26.70 | |
| | | CAR-53334 | | Carborundum Medalist Dri-Lube 3" Grip-On Disc, P80C, 50PK
Carbo Medalist is ideal for jobs that require an extremely durable abrasive that cuts fast, plus lasts extra long without generating heat. | $26.73 | |
| | | CAR-53335 | | Carborundum Medalist Dri-Lube 3" Grip-On Disc, P120C, 50PK
Carbo Medalist is ideal for jobs that require an extremely durable abrasive that cuts fast, plus lasts extra long without generating heat. | $26.73 | |
| | | CAR-53336 | | Carborundum Medalist Dri-Lube 3" Grip-On Disc, P150B, 50PK
Carbo Medalist is ideal for jobs that require an extremely durable abrasive that cuts fast, plus lasts extra long without generating heat. | $26.73 | |
| | | CAR-53337 | | Carborundum Medalist Dri-Lube 3" Grip-On Disc, P180B, 50PK
Carbo Medalist is ideal for jobs that require an extremely durable abrasive that cuts fast, plus lasts extra long without generating heat. | $26.73 | |
| | | CAR-53338 | | Carborundum Medalist Dri-Lube 3" Grip-On Disc, P220B, 50PK
Carbo Medalist is ideal for jobs that require an extremely durable abrasive that cuts fast, plus lasts extra long without generating heat. | $26.73 | |
| | | CAR-53339 | | Carborundum Medalist Dri-Lube 3" Grip-On Disc, P320B, 50PK
Carbo Medalist is ideal for jobs that require an extremely durable abrasive that cuts fast, plus lasts extra long without generating heat. | $26.73 | |
| | | CAR-53340 | | Carborundum Medalist Dri-Lube 3" Grip-On Disc, P400B, 50PK
Carbo Medalist is ideal for jobs that require an extremely durable abrasive that cuts fast, plus lasts extra long without generating heat. | $26.73 | |
| | | CAR-53342 | | Carborundum Medalist Dri-Lube 3" Grip-On Disc, P800B, 50PK
Carbo Medalist is ideal for jobs that require an extremely durable abrasive that cuts fast, plus lasts extra long without generating heat. | $26.73 | |
| | | CAR-53410 | | Carborundum Clean-Air Plus Medalist Dri-Lube Grip-On Vacuum Sheet Roll, 2-3/4" x 13 yds., P120C
Carbo Medalist is ideal for jobs that require an extremely durable abrasive that cuts fast, plus lasts extra long without generating heat. | $26.83 | |
| | | CAR-53411 | | Carborundum Clean-Air Plus Medalist Dri-Lube Grip-On Vacuum Sheet Roll, 2-3/4" x 13 yds., P180B
Carbo Medalist is ideal for jobs that require an extremely durable abrasive that cuts fast, plus lasts extra long without generating heat. | $26.83 | |
| | | CAR-53412 | | Carborundum Clean-Air Plus Medalist Dri-Lube Grip-On Vacuum Sheet Roll, 2-3/4" x 13 yds., P220B
Carbo Medalist is ideal for jobs that require an extremely durable abrasive that cuts fast, plus lasts extra long without generating heat. | $26.83 | |
| | | CAR-53413 | | Carborundum Clean-Air Plus Medalist Dri-Lube Grip-On Vacuum Sheet Roll, 2-3/4" x 13 yds., P320B
Carbo Medalist is ideal for jobs that require an extremely durable abrasive that cuts fast, plus lasts extra long without generating heat. | $26.83 | |
| | | CAR-53414 | | Carborundum Clean-Air Plus Medalist Dri-Lube Grip-On Vacuum Sheet Roll, 2-3/4" x 13 yds., P400B
Carbo Medalist is ideal for jobs that require an extremely durable abrasive that cuts fast, plus lasts extra long without generating heat. | $26.83 | |
| | | CAR-63612 | | Carborundum Gold Dri-Lube PSA Vacuum Disc Roll, 5" x 5h, P80C, 100/RL
Ideal for sanding paints, primers, plastics and fiberglass, as well as whitewood sanding, clean-up and repair. | $27.04 | |
| | | CAR-99310 | | Carborundum Back-Up Pads - Medium Low Profile PSA-Vacuum, 5" x 5 hole, 15,000 rpm
Two back-up pad profiles and two densities give you all the options you need for any sanding job. | $27.24 | |
| | | CAR-20459 | | Carborundum Premier Red Dri-Lube Stick-On Body File Strips, 2-3/4" x 16-1/2", P180B, 50PK
These body file sheets are good for dry sanding old paint, primer, primer surfacer, and for shaping and finishing plastic filler, and feather-edging repaired areas. | $27.47 | |
| | | CAR-20461 | | Carborundum Premier Red Dri-Lube Stick-On Body File Strips, 2-3/4" x 16-1/2", P120B, 50PK
These body file sheets are good for dry sanding old paint, primer, primer surfacer, and for shaping and finishing plastic filler, and feather-edging repaired areas. | $27.47 | |
| | | CAR-20615 | | Carborundum Premier Red Dri-Lube PSA Disc Roll, 3-1/2", P400B, 100Roll
Best choice for sanding all paints, primers, plastics and fiberglass. Also suited for sealer and wash coats in wood furniture. | $27.63 | |
| | | CAR-18621 | | Carborundum Flap Disc 4-1/2x7/8 Type 29 Zirconia Alumina 60Grit 5Bx
Abrasive Flap Disc, Diameter 4-1/2", Arbor Hole 7/8", Type 29, 60 Grit, Max RPM 13,300, Fiberglass Plate, Zirconia Alumina Abrasive Grain, Best Choice When Speed Is Main Concern | $27.79 | |
| | | CAR-18622 | | Carborundum Flap Disc 4-1/2x7/8 Type 29 Zirconia Alumina 40Grit 5Bx
Abrasive Flap Disc, Diameter 4-1/2", Arbor Hole 7/8", Type 29, 40 Grit, Max RPM 13,300, Fiberglass Plate, Zirconia Alumina Abrasive Grain, Best Choice When Speed Is Main Concern | $27.79 | |
| | | CAR-18623 | | Carborundum Premier Red Zirconia Alumina Resin Cloth Flap Disc 4-1/2" X 7/8" Type 29 36Grit 5Pk
Ideal for metal grinding and polishing, especially for weld bead grinding on fine carbon and stainless steel. | $27.79 | |
| | | CAR-68512 | | Carborundum EZ Wrap Protective Plastic – Floor Mats, 16-1/2" x 21", Non-Slip, 125PK
Will not slip or tear. Protects floor from dirt, grease and chemicals. Perforated roll. Generous size: 16-1/2" x 21" | $27.94 | |
| | | CAR-61584 | | Carborundum White Aluminum Oxide Reinforced Cut-Off Wheel 4-1/2 x .040 x 7/8 Type 01/41 A60Grit 25Pk
Economical choice for initial price conscious customers with general purpose applications. | $20.97 $27.96 | |
| | | CAR-70546 | | Carborundum 5" White Lightning Dri-Lube Stick-On Disc Roll, P80B, 100/RL
Ideal for sanding paint and primer. Pressure Sensitive Adhesive (PSA) backing. | $28.24 | |
| | | CAR-62967 | | Carborundum Premier Red E-Zview Flex-Loc Fiber Discs, 5", ZA/Ceramic, 36 Grade, 10PK
Ideal for heavy duty grinding of welds, gates, risers and parting lines on castings and carbon steels. | $28.44 | |
| | | CAR-99323 | | Carborundum Back-Up Pads - Medium Tapered Grip-On, 6", 15,000 rpm
Two back-up pad profiles and two densities give you all the options you need for any sanding job. | $28.57 | |
| | | CAR-99313 | | Carborundum Back-Up Pads - Medium Low Profile Grip-On, 5", 15,000 rpm
Two back-up pad profiles and two densities give you all the options you need for any sanding job. | $28.62 | |
| | | CAR-20123 | | Carborundum Gold Aluminum Oxide Dri-Lube Resin Paper Open Grip-On Disc 5" X 0" P80 100Pk
Ideal for sanding paints, primers, plastics and fiberglass, as well as whitewood sanding, clean-up and repair. | $28.79 | |
| | | CAR-10567 | | Carborundum Gold PSA Stik-On Paper Discs 6" P80 100Roll
Paper Disc, Pressure Sensitive Adhesive, 6 Inch Diameter, Grit P80, CAP Code C 0712 DO, P-Graded Aluminum Oxide, C-Weight Backing, Link Disc Roll, 100 Discs Per Roll | $28.80 | |
| | | CAR-99322 | | Carborundum Back-Up Pads - Medium Tapered Grip-On-Vacuum, 5" x 5 hole, 15,000 rpm
Two back-up pad profiles and two densities give you all the options you need for any sanding job. | $28.85 | |
| | | CAR-99311 | | Carborundum Back-Up Pads - Medium Low Profile PSA, 6", 15,000 rpm
Two back-up pad profiles and two densities give you all the options you need for any sanding job. | $28.95 | |
| | | CAR-10560 | | Carborundum Gold PSA Stik-On Paper Discs 6" P240 100Roll
Paper Disc, Pressure Sensitive Adhesive, 6 Inch Diameter, Grit P240, CAP Code C 0712 DO, P-Graded Aluminum Oxide, C-Weight Backing, Link Disc Roll, 100 Discs Per Roll | $28.98 | |
| | | CAR-10561 | | Carborundum Gold PSA Stik-On Paper Discs 6" P220 100Roll
Paper Disc, Pressure Sensitive Adhesive, 6 Inch Diameter, Grit P220, CAP Code C 0712 DO, P-Graded Aluminum Oxide, C-Weight Backing, Link Disc Roll, 100 Discs Per Roll | $28.98 | |
| | | CAR-62966 | | Carborundum Premier Red E-Zview Flex-Loc Fiber Discs, 5", ZA/Ceramic, 24 Grade, 10PK
Ideal for heavy duty grinding of welds, gates, risers and parting lines on castings and carbon steels. | $28.99 | |
| | | CAR-20122 | | Carborundum Gold Aluminum Oxide Dri-Lube Resin Paper Open Grip-On Disc 5" X 0" P100 100Pk
Ideal for sanding paints, primers, plastics and fiberglass, as well as whitewood sanding, clean-up and repair. | $29.06 | |
| | | CAR-20121 | | Carborundum Gold Aluminum Oxide Dri-Lube Resin Paper Open Grip-On Disc 5" X 0" P120 100Pk
Ideal for sanding paints, primers, plastics and fiberglass, as well as whitewood sanding, clean-up and repair. | $29.06 | |
| | | CAR-20120 | | Carborundum Gold Aluminum Oxide Dri-Lube Resin Paper Open Grip-On Disc 5" X 0" P150 100Pk
Ideal for sanding paints, primers, plastics and fiberglass, as well as whitewood sanding, clean-up and repair. | $29.06 | |
| | | CAR-20118 | | Carborundum Gold Aluminum Oxide Dri-Lube Resin Paper Open Grip-On Disc 5" X 0" P220 100Pk
Ideal for sanding paints, primers, plastics and fiberglass, as well as whitewood sanding, clean-up and repair. | $29.06 | |
| | | CAR-99305 | | Carborundum Back-Up Pads - Soft Low Profile PSA, 6", 12,000 rpm
Two back-up pad profiles and two densities give you all the options you need for any sanding job. | $29.09 | |
| | | CAR-99319 | | Carborundum Back-Up Pads - Medium Tapered PSA, 6", 15,000 rpm
Two back-up pad profiles and two densities give you all the options you need for any sanding job. | $29.14 | |
| | | CAR-99383 | | Carborundum Fire Ceramic Alumina Cloth Flex-Loc TR Grinding Disc, 2", 80 Grit, 25PK
Ideal for fast stock removal in a small area. Ceramic self-sharpening abrasive is ideal for high-pressure, heavy metal removal applications. | $29.24 | |
| | | CAR-99307 | | Carborundum Back-Up Pads - Soft Low Profile Grip-On, 5", 12,000 rpm
Two back-up pad profiles and two densities give you all the options you need for any sanding job. | $29.30 | |
| | | CAR-10907 | | Carborundum Clip-On Marine File Strips, 2-3/4" x 17-1/2", Aluminum Oxide, P40, 50PK
Ideal for blending and shaping all types of marine fillers. | $29.46 | |
| | | CAR-10876 | | Carborundum 9" x 11" Paper Sheet, Aluminum Oxide, P36, 25Pk
Ideal for general-duty dry sanding of paint, primers, light metals and woods. | $29.71 | |
| | | CAR-10558 | | Carborundum Gold PSA Stik-On Paper Discs 6" P320 100Roll
Paper Disc, Pressure Sensitive Adhesive, 6 Inch Diameter, Grit P320, CAP Code C 0712 DO, P-Graded Aluminum Oxide, C-Weight Backing, Link Disc Roll, 100 Discs Per Roll | $29.78 | |
| | | CAR-10562 | | Carborundum Gold PSA Stik-On Paper Discs 6" P180 100Roll
Paper Disc, Pressure Sensitive Adhesive, 6 Inch Diameter, Grit P180, CAP Code C 0712 DO, P-Graded Aluminum Oxide, C-Weight Backing, Link Disc Roll, 100 Discs Per Roll | $29.78 | |
| | | CAR-10565 | | Carborundum Gold PSA Stik-On Paper Discs 6" P120 100Roll
Paper Disc, Pressure Sensitive Adhesive, 6 Inch Diameter, Grit P120, CAP Code C 0712 DO, P-Graded Aluminum Oxide, C-Weight Backing, Link Disc Roll, 100 Discs Per Roll | $29.78 | |
| | | CAR-99316 | | Carborundum Back-Up Pads - Medium Low Profile Grip-On-Vacuum, 6" x 6 hole, 15,000 rpm
Two back-up pad profiles and two densities give you all the options you need for any sanding job. | $29.79 | |
| | | CAR-20463 | | Carborundum Premier Red Dri-Lube Stick-On Body File Strips, 2-3/4" x 16-1/2", P80B, 50PK
These body file sheets are good for dry sanding old paint, primer, primer surfacer, and for shaping and finishing plastic filler, and feather-edging repaired areas. | $29.80 | |
| | | CAR-09965 | | Carborundum 7" x 1" x 1" Bench/Pedestal Wheel, Aluminum Oxide, Medium, 3,600 rpm
Ideal for removing burrs on steel parts, as well as sharpening high-speed steel cutting tools. | $29.87 | |
| | | CAR-09966 | | Carborundum 7" x 1" x 1" Bench/Pedestal Wheel, Aluminum Oxide, Coarse, 3,600 rpm
Ideal for removing burrs on steel parts, as well as sharpening high-speed steel cutting tools. | $29.87 | |
| | | CAR-21348 | | Carborundum Premier Red Clip-On Body File Strip, 2-3/4" x 17-1/2", 80E, 50PK
The self-sharpening zirconia alumina grain improves cut rate, minimizes loading and reduces heat | $29.90 | |
| | | CAR-10557 | | Carborundum Gold PSA Stik-On Paper Discs 6" P400 100Roll
Paper Disc, Pressure Sensitive Adhesive, 6 Inch Diameter, Grit P400, CAP Code C 0712 DO, P-Graded Aluminum Oxide, C-Weight Backing, Link Disc Roll, 100 Discs Per Roll | $30.48 | |
| | | CAR-10563 | | Carborundum Gold PSA Stik-On Paper Discs 6" P150 100Roll
Paper Disc, Pressure Sensitive Adhesive, 6 Inch Diameter, Grit P150, CAP Code C 0712 DO, P-Graded Aluminum Oxide, C-Weight Backing, Link Disc Roll, 100 Discs Per Roll | $30.48 | |
| | | CAR-10566 | | Carborundum Gold PSA Stik-On Paper Discs 6" P100 100Roll
Paper Disc, Pressure Sensitive Adhesive, 6 Inch Diameter, Grit P100, CAP Code C 0712 DO, P-Graded Aluminum Oxide, C-Weight Backing, Link Disc Roll, 100 Discs Per Roll | $30.48 | |
| | | CAR-20119 | | Carborundum Gold Aluminum Oxide Dri-Lube Resin Paper Open Grip-On Disc 5" X 0" P180 100Pk
Ideal for sanding paints, primers, plastics and fiberglass, as well as whitewood sanding, clean-up and repair. | $30.63 | |
| | | CAR-09760 | | Carborundum 2" Flex-Loc TR Disc, Zirconia Alumina, 50 Grit, YP1288R, 25Pk
Zirconia alumina self-sharpening abrasive cuts fast and cool to minimize heat build-up. | $30.67 | |
| | | CAR-99570 | | Carborundum Medalist Dri-Lube Grip-On Sheet Roll, 2-3/4" x 13 yds., P80C
Continuous perforated rolls made from high performance, ceramic grain minimize excess waste for board file papers. | $31.13 | |
| | | CAR-70530 | | Carborundum Overspray Sheeting 12' x 400'
“Value” paintable overspray sheeting is a medium-density, corona-treated plastic. | $31.21 | |
| | | CAR-09257 | | Carborundum Gold Cut-Off Wheel 4x.035x3/8 A60-OBFTK 25Bx
Cut Off Wheel, Carbo Gold, 4 Inch Diameter, .035 Thickness, 3/8 Arbor Hole, Aluminum Oxide Abrasive Grain, A60-OBFTK, Max RPM 19100, For use cutting ferrous metals, alloy steel and cast iron. | $31.33 | |
| | | CAR-53396 | | Carborundum Fibratex Scuff Roll, 4" x 30' Primer Prep, Perforated, Maroon, Plastic Wrapped
Tear the rolls to the exact length needed to get the job done quickly and correctly. Perforations are every 3". Plastic wrapped rolls dispense easily and keep the product clean. | $31.39 | |
| | | CAR-53397 | | Carborundum Fibratex Scuff Roll, 4" x 30' Color Prep, Perforated, Gray, Plastic Wrapped
Tear the rolls to the exact length needed to get the job done quickly and correctly. Perforations are every 3". Plastic wrapped rolls dispense easily and keep the product clean. | $31.39 | |
| | | CAR-99385 | | Carborundum Fire Ceramic Alumina Cloth Flex-Loc TR Grinding Disc, 2", 50 Grit, 25PK
Ideal for fast stock removal in a small area. Ceramic self-sharpening abrasive is ideal for high-pressure, heavy metal removal applications. | $31.57 | |
| | | CAR-53400 | | Carborundum Fibratex Thin-Flex Scuff Roll, 4" x 30' Primer Prep, Perforated, Maroon, Plastic Wrapped
Tear the rolls to the exact length needed to get the job done quickly and correctly. Perforations are every 3". Plastic wrapped rolls dispense easily and keep the product clean. | $31.84 | |
| | | CAR-53401 | | Carborundum Fibratex Thin-Flex Scuff Roll, 4" x 30' Color Prep, Perforated, Gray, Plastic Wrapped
Tear the rolls to the exact length needed to get the job done quickly and correctly. Perforations are every 3". Plastic wrapped rolls dispense easily and keep the product clean. | $31.84 | |
| | | CAR-53343 | | Carborundum Medalist Dri-Lube 3" Grip-On Disc, P1000B, 50PK
Carbo Medalist is ideal for jobs that require an extremely durable abrasive that cuts fast, plus lasts extra long without generating heat. | $31.89 | |
| | | CAR-09960 | | Carborundum 8" x 1" x 1" Bench/Pedestal Wheel, Aluminum Oxide, Coarse, 3,600 rpm
Ideal for removing burrs on steel parts, as well as sharpening high-speed steel cutting tools. | $31.93 | |
| | | CAR-70414 | | Carborundum 8" Grip-On Back-Up Pad for Buffing/Polishing Pads, 5/8"-11 Female
These pads are engineered to work with Carbo Finish Extra-Cut Polish to achieve the optimal cut in the least amount of time while producing the best finish. | $31.94 | |
| | | CAR-09767 | | Carborundum 2" Flex-Loc TR Disc, Zirconia Alumina, 36 Grit, YP1288R, 25Pk
Zirconia alumina self-sharpening abrasive cuts fast and cool to minimize heat build-up. | $32.04 | |
| | | CAR-99308 | | Carborundum Back-Up Pads - Soft Low Profile Grip-On, 6", 12,000 rpm
Two back-up pad profiles and two densities give you all the options you need for any sanding job. | $32.07 | |
| | | CAR-53344 | | Carborundum Medalist Dri-Lube 3" Grip-On Disc, P1500B, 50PK
Carbo Medalist is ideal for jobs that require an extremely durable abrasive that cuts fast, plus lasts extra long without generating heat. | $32.19 | |
| | | CAR-67378 | | Carborundum Double Sided Acrylic Attachment Tape, 1/2" x 20 yds., .045 thick, Gray
High-density gray foam tape coated with high strength acrylic adhesive on both sides and a red polyethylene release liner is designed for bonding medium to large moldings and accessories. | $32.23 | |
| | | CAR-18620 | | Carborundum Flap Disc 4-1/2x7/8 Type 29 Zirconia Alumina 80Grit 5Bx
Abrasive Flap Disc, Diameter 4-1/2", Arbor Hole 7/8", Type 29, 80 Grit, Max RPM 13,300, Fiberglass Plate, Zirconia Alumina Abrasive Grain, Best Choice When Speed Is Main Concern | $32.50 | |
| | | CAR-53332 | | Carborundum Fibratex Carbo Fire 2" Surface Blend Flex-Loc TR Disc, X-Coarse, 12,000 rpm, 10PK
Ideal for removing surface rust, blending out grind marks, and removing coatings from automotive surfaces and will not smear. | $32.60 | |
| | | CAR-02837 | | Carborundum Gold Grinding Wheel 4x1/4x5/8 Type 27 A24 20Bx
Depressed Center Grinding Wheel, Carbo Gold, 4" Diameter, 1/4" Thick, 5/8" Arbor, 15280 RPM, Aluminum Oxide Grain, A24 Grade, Type 27, For Use on Steel and Metal | $24.52 $32.69 | |
| | | CAR-10908 | | Carborundum Clip-On Marine File Strips, 2-3/4" x 17-1/2", Aluminum Oxide, P36, 50PK
Ideal for blending and shaping all types of marine fillers. | $32.71 | |
| | | CAR-99467 | | Carborundum White Lightning Stick-On Disc, 8", P80E, 25PK
Ideal for sanding paint and primer. Carbo White Lighting tough E-weight backing resists tearing and extends disc life. Ideal for sanding body filler. | $32.81 | |
| | | CAR-99386 | | Carborundum Fire Ceramic Alumina Cloth Flex-Loc TR Grinding Disc, 2", 36 Grit, 25PK
Ideal for fast stock removal in a small area. Ceramic self-sharpening abrasive is ideal for high-pressure, heavy metal removal applications. | $33.11 | |
| | | CAR-64060 | | Carborundum Premier Red Zirconia Alumina Resin Cloth Flap Disc 4-1/2" X 5/8"-11 Type 27 36Grit 5Pk
Ideal for metal grinding and polishing, especially for weld bead grinding on fine carbon and stainless steel. | $24.92 $33.22 | |
| | | CAR-53402 | | Carborundum Fibratex Thin-Flex Scuff Roll, 4" x 30' Primer Prep, Perforated, Maroon, Boxed
Tear the rolls to the exact length needed to get the job done quickly and correctly. Perforations are every 3". Plastic wrapped rolls dispense easily and keep the product clean. | $33.43 | |
| | | CAR-53403 | | Carborundum Fibratex Thin-Flex Scuff Roll, 4" x 30' Color Prep, Perforated, Gray, Boxed
Tear the rolls to the exact length needed to get the job done quickly and correctly. Perforations are every 3". Plastic wrapped rolls dispense easily and keep the product clean. | $33.43 | |
| | | CAR-63869 | | Carborundum Mirrorfinish Waterproof Sheet, 5-1/2" x 9", 2000B, 50PK
The MirrorFinish design works just as well wet or dry and gives the same cut no matter how you use it. | $33.46 | |
| | | CAR-63870 | | Carborundum Mirrorfinish Waterproof Sheet, 5-1/2" x 9", 1500B, 50PK
The MirrorFinish design works just as well wet or dry and gives the same cut no matter how you use it. | $33.46 | |
| | | CAR-63871 | | Carborundum Mirrorfinish Waterproof Sheet, 5-1/2" x 9", 1200B, 50PK
The MirrorFinish design works just as well wet or dry and gives the same cut no matter how you use it. | $33.46 | |
| | | CAR-63872 | | Carborundum Mirrorfinish Waterproof Sheet, 5-1/2" x 9", 1000B, 50PK
The MirrorFinish design works just as well wet or dry and gives the same cut no matter how you use it. | $33.46 | |
| | | CAR-09260 | | Carborundum Gold Reinforced Aluminum Oxide Cut-Off Wheel 3 x 1/8 x 3/8 A36Grit 25Pk
For cutting off ferrous metals, alloy steels and cast iron. | $33.47 | |
| | | CAR-68511 | | Carborundum EZ Wrap Protective Plastic – Wheel Maskers, Fits up to 17", Paintable, 50PK
Tri-layer plastic. Paintable – NO Flaking. Fully covers both sides of the wheel. Covers wheels up to 17". | $33.53 | |
| | | CAR-70556 | | Carborundum 6" White Lightning Dri-Lube Stick-On Disc Roll, P100B, 100/RL
Ideal for sanding paint and primer. Pressure Sensitive Adhesive (PSA) backing. | $33.57 | |
| | | CAR-70557 | | Carborundum 6" White Lightning Dri-Lube Stick-On Disc Roll, P120B, 100/RL
Ideal for sanding paint and primer. Pressure Sensitive Adhesive (PSA) backing. | $33.57 | |
| | | CAR-70558 | | Carborundum 6" White Lightning Dri-Lube Stick-On Disc Roll, P150B, 100/RL
Ideal for sanding paint and primer. Pressure Sensitive Adhesive (PSA) backing. | $33.57 | |
| | | CAR-70561 | | Carborundum 6" White Lightning Dri-Lube Stick-On Disc Roll, P240B, 100/RL
Ideal for sanding paint and primer. Pressure Sensitive Adhesive (PSA) backing. | $33.57 | |
| | | CAR-70562 | | Carborundum 6" White Lightning Dri-Lube Stick-On Disc Roll, P320B, 100/RL
Ideal for sanding paint and primer. Pressure Sensitive Adhesive (PSA) backing. | $33.57 | |
| | | CAR-70563 | | Carborundum 6" White Lightning Dri-Lube Stick-On Disc Roll, P400B, 100/RL
Ideal for sanding paint and primer. Pressure Sensitive Adhesive (PSA) backing. | $33.57 | |
| | | CAR-70581 | | Carborundum 6" White Lightning Dri-Lube Stick-On Disc Roll, P800B, 100/RL
Ideal for sanding paint and primer. Pressure Sensitive Adhesive (PSA) backing. | $33.57 | |
| | | CAR-53346 | | Carborundum Black Powder Guide Coat, 100g Container
Ideal for identifying imperfections in primer and body filler that need to be sanded out to ensure a flat finish. | $33.60 | |
| | | CAR-21343 | | Carborundum Premier Red Grip-On Body File Strip, 2-3/4" x 16-1/2", 40E, 25PK
The self-sharpening zirconia alumina grain improves cut rate, minimizes loading and reduces heat | $33.64 | |
| | | CAR-01209 | | Carborundum Finish Extra-Cut Polish, Quart
Carbo Finish Extra-Cut is easy to use and cleans up with just water. | $34.16 | |
| | | CAR-21315 | | Carborundum Premier Red Hook & Loop Grip-on Disc 6" 80E 25Bx
Abrasive Sandpaper Disc, Hook & Loop, 6" Diameter, P-Graded, Heat Treated, Aluminum Oxide, 80E Grit, Premier Red, E Weight, Latex Backing, CAP Code E 1214 O | $34.29 | |
| | | CAR-10819 | | Carborundum Silicon Carbide Dri-Lube Paper Sheet 9" X 11" 80Grit 50Pk
For hand and machine sanding paint and primer, as well as whitewood clean-up and sealer sanding. | $25.80 $34.40 | |
| | | CAR-69473 | | Carborundum 3" Flex-Loc TR Disc, Zirconia Alumina, 50 Grit, YP1288R, 25PK
Zirconia alumina self-sharpening abrasive cuts fast and cool to minimize heat build-up. | $34.47 | |
| | | CAR-20348 | | Carborundum Premier Red Zirconia Alumina Resin Cloth Flap Disc 4-1/2" X 5/8" Type 29 36Grit 5Pk
Ideal for metal grinding and polishing, especially for weld bead grinding on fine carbon and stainless steel. | $34.58 | |
| | | CAR-20347 | | Carborundum Premier Red Zirconia Alumina Resin Cloth Flap Disc 4-1/2" X 5/8" Type 29 40Grit 5Pk
Ideal for metal grinding and polishing, especially for weld bead grinding on fine carbon and stainless steel. | $34.58 | |
| | | CAR-20345 | | Carborundum Premier Red Zirconia Alumina Resin Cloth Flap Disc 4-1/2" X 5/8" Type 29 80Grit 5Pk
Ideal for metal grinding and polishing, especially for weld bead grinding on fine carbon and stainless steel. | $34.58 | |
| | | CAR-53328 | | Carborundum White Lightning 8" Grip-On Disc, P80, 25PK
Ideal for sanding paint and primer. | $34.81 | |
| | | CAR-20126 | | Carborundum Gold Aluminum Oxide Dri-Lube Resin Paper Open Grip-On Disc 6" X 0" P320 100Pk
Ideal for sanding paints, primers, plastics and fiberglass, as well as whitewood sanding, clean-up and repair. | $34.99 | |
| | | CAR-99512 | | Carborundum Medalist Ceramic Alumina Dri-Lube Resin Paper Open Grip-On Disc 5" X 0" P100 50Pk
Best choice for stripping and preparing primed/painted surfaces for finishing, sanding of plastics, fiberglass, and composites. | $35.09 | |
| | | CAR-99511 | | Carborundum Medalist Ceramic Alumina Dri-Lube Resin Paper Open Grip-On Disc 5" X 0" P120 50Pk
Best choice for stripping and preparing primed/painted surfaces for finishing, sanding of plastics, fiberglass, and composites. | $35.09 | |
| | | CAR-99509 | | Carborundum Medalist Ceramic Alumina Dri-Lube Resin Paper Open Grip-On Disc 5" X 0" P180 50Pk
Best choice for stripping and preparing primed/painted surfaces for finishing, sanding of plastics, fiberglass, and composites. | $35.09 | |
| | | CAR-99508 | | Carborundum Medalist Ceramic Alumina Dri-Lube Resin Paper Open Grip-On Disc 5" X 0" P220 50Pk
Best choice for stripping and preparing primed/painted surfaces for finishing, sanding of plastics, fiberglass, and composites. | $35.09 | |
| | | CAR-99507 | | Carborundum Medalist Ceramic Alumina Dri-Lube Resin Paper Open Grip-On Disc 5" X 0" P240 50Pk
Best choice for stripping and preparing primed/painted surfaces for finishing, sanding of plastics, fiberglass, and composites. | $35.09 | |
| | | CAR-99506 | | Carborundum Medalist Ceramic Alumina Dri-Lube Resin Paper Open Grip-On Disc 5" X 0" P280 50Pk
Best choice for stripping and preparing primed/painted surfaces for finishing, sanding of plastics, fiberglass, and composites. | $35.09 | |
| | | CAR-99505 | | Carborundum Medalist Ceramic Alumina Dri-Lube Resin Paper Open Grip-On Disc 5" X 0" P320 50Pk
Best choice for stripping and preparing primed/painted surfaces for finishing, sanding of plastics, fiberglass, and composites. | $35.09 | |
| | | CAR-99504 | | Carborundum Medalist Ceramic Alumina Dri-Lube Resin Paper Open Grip-On Disc 5" X 0" P400 50Pk
Best choice for stripping and preparing primed/painted surfaces for finishing, sanding of plastics, fiberglass, and composites. | $35.09 | |
| | | CAR-99502 | | Carborundum Medalist Ceramic Alumina Dri-Lube Resin Paper Open Grip-On Disc 5" X 0" P600 50Pk
Best choice for stripping and preparing primed/painted surfaces for finishing, sanding of plastics, fiberglass, and composites. | $35.09 | |
| | | CAR-99501 | | Carborundum Medalist Ceramic Alumina Dri-Lube Resin Paper Open Grip-On Disc 5" X 0" P800 50Pk
Best choice for stripping and preparing primed/painted surfaces for finishing, sanding of plastics, fiberglass, and composites. | $35.09 | |
| | | CAR-09768 | | Carborundum 2" Flex-Loc TR Disc, Zirconia Alumina, 24Grit , YP1288R, 25Pk
Zirconia alumina self-sharpening abrasive cuts fast and cool to minimize heat build-up. | $35.10 | |
| | | CAR-10872 | | Carborundum 9" x 11" Paper Sheet, Aluminum Oxide, P80, 50PK
Ideal for general-duty dry sanding of paint, primers, light metals and woods. | $35.30 | |
| | | CAR-02842 | | Carborundum Gold Grinding Wheel 4-1/2x1/4x7/8 Type 27 A24 20Bx
Depressed Center Grinding Wheel, Carbo Gold, 4-1/2" Diameter, 1/4" Thick, 7/8" Arbor, 13580 RPM, Aluminum Oxide Grain, A24 Grade, Type 27, For Use on Steel and Metal | $35.38 | |
| | | CAR-70121 | | Carborundum 70121, EZ Touch Contour Sanding Sponge, Medium 20Bx
Abrasive Sponge, Contour, 4-1/2" Width, 5-1/2" Length, 3/16" Thick, Medium Grit, Aluminum Oxide Abrasive, Coated One Side, Can Be Used Wet or Dry, Washable, Box of 20 | $35.42 | |
| | | CAR-70122 | | Carborundum 70122, EZ Touch Contour Sanding Sponge, Fine 20Bx
Abrasive Sponge, Contour, 4-1/2" Width, 5-1/2" Length, 3/16" Thick, Fine Grit, Aluminum Oxide Abrasive, Coated One Side, Can Be Used Wet or Dry, Washable, Box of 20 | $35.42 | |
| | | CAR-70124 | | Carborundum 70124 EZ Touch Contour Sanding Sponge Ultra Fine 20Bx
Abrasive Sponge, Contour, 4-1/2" Width, 5-1/2" Length, 3/16" Thick, Ultra Fine Grit, Silicon Carbide Abrasive, Coated One Side, Can Be Used Wet or Dry, Washable, Box of 20 | $35.42 | |
| | | CAR-70125 | | Carborundum 70125 EZ Touch Contour Sanding Sponge Micro Fine 20Bx
Abrasive Sponge, Contour, 4-1/2" Width, 5-1/2" Length, 3/16" Thick, Micro Fine Grit, Silicon Carbide Abrasive, Coated One Side, Can Be Used Wet or Dry, Washable, Box of 20 | $35.42 | |
| | | CAR-12033 | | Carborundum Back-Up Pads, 5" Medium, Air-Cooled, 10,000 rpm
Back-Up Pads For Grinding Discs. Discs are held in place by Retainer Nut # 05539512568 | $35.47 | |
| | | CAR-09254 | | Carborundum Gold Reinforced Aluminum Oxide Cut-Off Wheel 4 x 1/16 x 3/8 A36Grit 25Pk
For cutting off ferrous metals, alloy steels and cast iron. | $35.61 | |
| | | CAR-09959 | | Carborundum 8" x 1" x 1" Bench/Pedestal Wheel, Aluminum Oxide, Medium, 3,600 rpm
Ideal for removing burrs on steel parts, as well as sharpening high-speed steel cutting tools. | $35.79 | |
| | | CAR-70559 | | Carborundum 6" White Lightning Dri-Lube Stick-On Disc Roll, P180B, 100/RL
Ideal for sanding paint and primer. Pressure Sensitive Adhesive (PSA) backing. | $36.80 | |
| | | CAR-70560 | | Carborundum 6" White Lightning Dri-Lube Stick-On Disc Roll, P220B, 100/RL
Ideal for sanding paint and primer. Pressure Sensitive Adhesive (PSA) backing. | $36.80 | |
| | | CAR-70580 | | Carborundum 6" White Lightning Dri-Lube Stick-On Disc Roll, P600B, 100/RL
Ideal for sanding paint and primer. Pressure Sensitive Adhesive (PSA) backing. | $36.80 | |
| | | CAR-18110 | | Carborundum Premier Red PSA Stik-On Paper Discs 5" P180 100Roll
Paper Disc, Pressure Sensitive Adhesive, 5 Inch Diameter, Grit P180, CAP Code B 0912 DO, P-Graded Heat Treated Aluminum Oxide, B-Weight Backing, Link Disc Roll, 100 Discs Per Roll | $36.93 | |
| | | CAR-15293 | | Carborundum Premier Red PSA Paper Disc 5"x5 Hole Vacuum P120 100Roll
Abrasive Sandpaper Disc, Paper, PSA - Pressure Sensitive Adhesive, 5 Inch Diameter, 5 Hole, Vacuum, Grit P120, CAP Code B 0912 DO, P-Graded Heat Treated Aluminum Oxide, B-Weight Backing, Link Disc Roll, 100 Discs Per Roll | $36.93 | |
| | | CAR-90128 | | Carborundum Premier Red Mini Quick-Change Flap Discs, 2", Type 3, Zirconia Alumina, 120 Grit, 10PK
Carbo Premier Red Mini Flap Discs eliminate the conventional 2-step process in grinding, removal, and blending. | $37.00 | |
| | | CAR-18107 | | Carborundum Premier Red PSA Stik-On Paper Discs 5" P280 100Roll
Paper Disc, Pressure Sensitive Adhesive, 5 Inch Diameter, Grit P280, CAP Code B 0912 DO, P-Graded Heat Treated Aluminum Oxide, B-Weight Backing, Link Disc Roll, 100 Discs Per Roll | $37.23 | |
| | | CAR-63779 | | Carborundum Premier Red Dri-Lube Stick-On Discs, 5", P500B, 100/RL
Anti-loading, fast cutting and long lasting premium sandpaper for shops that want to decrease costs by increasing productivity. | $37.24 | |
| | | CAR-21344 | | Carborundum Premier Red Grip-On Body File Strip, 2-3/4" x 16-1/2", 36E, 25PK
The self-sharpening zirconia alumina grain improves cut rate, minimizes loading and reduces heat | $37.39 | |
| | | CAR-20133 | | Carborundum Gold Aluminum Oxide Dri-Lube Resin Paper Open Grip-On Disc 6" X 0" P100 100Pk
Ideal for sanding paints, primers, plastics and fiberglass, as well as whitewood sanding, clean-up and repair. | $37.64 | |
| | | CAR-20132 | | Carborundum Gold Aluminum Oxide Dri-Lube Resin Paper Open Grip-On Disc 6" X 0" P120 100Pk
Ideal for sanding paints, primers, plastics and fiberglass, as well as whitewood sanding, clean-up and repair. | $37.64 | |
| | | CAR-20131 | | Carborundum Gold Aluminum Oxide Dri-Lube Resin Paper Open Grip-On Disc 6" X 0" P150 100Pk
Ideal for sanding paints, primers, plastics and fiberglass, as well as whitewood sanding, clean-up and repair. | $37.64 | |
| | | CAR-20130 | | Carborundum Gold Aluminum Oxide Dri-Lube Resin Paper Open Grip-On Disc 6" X 0" P180 100Pk
Ideal for sanding paints, primers, plastics and fiberglass, as well as whitewood sanding, clean-up and repair. | $37.64 | |
| | | CAR-20129 | | Carborundum Gold Aluminum Oxide Dri-Lube Resin Paper Open Grip-On Disc 6" X 0" P220 100Pk
Ideal for sanding paints, primers, plastics and fiberglass, as well as whitewood sanding, clean-up and repair. | $37.64 | |
| | | CAR-20125 | | Carborundum Gold Aluminum Oxide Dri-Lube Resin Paper Open Grip-On Disc 6" X 0" P400 100Pk
Ideal for sanding paints, primers, plastics and fiberglass, as well as whitewood sanding, clean-up and repair. | $37.64 | |
| | | CAR-18101 | | Carborundum Premier Red PSA Stik-On Paper Discs 5" P800 100Roll
Paper Disc, Pressure Sensitive Adhesive, 5 Inch Diameter, Grit P800, CAP Code B 0912 DO, P-Graded Heat Treated Aluminum Oxide, B-Weight Backing, Link Disc Roll, 100 Discs Per Roll | $37.68 |
Cart Contents:
