Concrete Coatings & Sealers

Bituthene mastic is a rubberized asphalt-based mastic. It has excellent adhesion to structural concrete, masonry, glass-mat faced gypsum sheathing and wood and is designed to seal terminations, edges of patches, and overlaps in detail areas. 30 ounce.

MasterSeal 581 is a portland cement-based coating for concrete and masonry that resists both positive and negative hydrostatic pressure.

MasterSeal 610 is a cold-applied water-based emulsified-asphalt damp-proofing and vapor-retarding coating for use on “green” or slightly damp surfaces. Fiber-free for application by brush or spray.

MasterSeal 614 is a cold-applied water-based emulsified-asphalt damp-proofing and vapor-retarding coating for use on “green” or slightly damp surfaces. Reinforced with long fibers for application by trowel.

MasterSeal 615 is a cold-applied water-based emulsified-asphalt damp-proofing and vapor-retarding coating for use on “green” or slightly damp surfaces. Reinforced with short fibers for application by brush or spray.

Two-component, low odor, fast curing water-based primer.

SikaTop Seal 107 is a two-component, polymer-modified, cementitious waterproofing and protective slurry mortar for concrete.

AQUA-CURE VOX is a water-based acrylic polymer curing and sealing compound. AQUA-CURE VOX is suitable for use over new and old concrete and performs well on both interior and exterior surfaces.

MasterKure CC 180WB is a modified, acrylic-based liquid polymer. It is recommended for use on new or existing concrete floors as classified in ACI Guide 302, Table 1.1. 5 Gallon.

Rugasol-S is a spray applied, water soluble liquid, formulated to retard the set of surface mortar in concrete to enable the aggregate to be exposed.

DIAMOND CLEAR is a state-of-the-art curing and sealing compound, specially designed to provide a quality cure and seal while assuring total resistance to yellowing from ultraviolet exposure.

MasterSeal HLM 5000 is a one-component, moisture-curing, bitumen-modified polyurethane elastomeric waterproofing membrane for exterior below-grade or between-slab applications. Self Leveling. 5 Gallon.

MasterSeal HLM 5000 is a one-component, moisture-curing, bitumen-modified polyurethane elastomeric waterproofing membrane for exterior below-grade or between-slab applications. Spray Grade. 5 Gallon.

MasterSeal HLM 5000 is a one-component, moisture-curing, bitumen-modified polyurethane elastomeric waterproofing membrane for exterior below-grade or between-slab applications. Roller Grade. 5 Gallon.

SikaFilm retards moisture evaporation from the concrete surface and acts as a finishing aid for concrete flatwork. surface mortar in concrete to enable the aggregate to be exposed.

SUPER DIAMOND CLEAR is a solvent based curing and sealing compound specially designed to cure new concrete, assuring proper cement hydration and strength gain, while providing a non-yellowing seal to protect and enhance the appearance of concrete.

EVERCLEAR VOX is a water based pure acrylic sealer for concrete with excellent blush resistance and total resistance to yellowing from UV exposure.

Sika Armatec 110 EpoCem is a 3-component, solvent-free, moisture-tolerant, epoxy-modified, cementitious product specifically formulated as a bonding agent and anti-corrosion coating.

EVERCLEAR is a pure acrylic sealer that protects and enhances the appearance of cured concrete with a clear, non-yellowing seal that is harder and more durable than standard cure and seal products.

Polymer-modified, 2-component, cementitious coating. Designed for use on concrete, mortar, and masonry substrates. Easily applied by brush, roller, or spray equipment.

Polymer-modified, 2-component, cementitious coating. Designed for use on concrete, mortar, and masonry substrates. Easily applied by brush, roller, or spray equipment.

Bituthene mastic is a rubberized asphalt-based mastic. It has excellent adhesion to structural concrete, masonry, glass-mat faced gypsum sheathing and wood and is designed to seal terminations, edges of patches, and overlaps in detail areas.

A single component, elastomeric, crack-bridging polyurethane-based waterproofing pedestrian traffic system with integral wear course. Special order.

Sika Armatec 110 EpoCem is a 3-component, solvent-free, moisture-tolerant, epoxy-modified, cementitious product specifically formulated as a bonding agent and anti-corrosion coating. 3.5 Gallon.

A single component, elastomeric, crack-bridging polyurethane-based waterproofing pedestrian traffic system with integral wear course. Special order.

A single component, elastomeric, crack-bridging polyurethane-based waterproofing pedestrian traffic system with integral wear course. Available in Gray, Charcoal and Tan. Special order.

A single component, elastomeric, crack-bridging polyurethane-based waterproofing pedestrian traffic system with integral wear course. Special order.

Sikagard®-705 L is a one part low viscosity, solvent free, reactive impregnation for concrete and cementitious substrates based on silane technology with 99% active ingredient.

Sikagard®-740 W is a one part low viscosity, reactive impregnation for concrete and cementitious substrates based on concentrated Silane emulsion.

Bituthene® Primer B2 LVC is a low VOC primer specially formulated to provide excellent initial and long-term adhesion of Bituthene® waterproofing membranes and GCP underlayments to damp or green substrates.

Two-component, low odor, fast curing water-based primer.

A single component, elastomeric, crack-bridging polyurethane-based waterproofing pedestrian traffic system with integral wear course. Special order.

A single component, elastomeric, crack-bridging polyurethane-based waterproofing pedestrian traffic system with integral wear course. Special order.

A single component, elastomeric, crack-bridging polyurethane-based waterproofing pedestrian traffic system with integral wear course. Special order.

Sika FerroGard 903 is a corrosion inhibiting impregnation coating for hardened concrete surfaces.