Admixtures

SikaLatex R is an acrylic-polymer latex. It is a non-reemulsifiable, general-purpose admixture to produce polymer-modified concrete and mortar.

SikaLiquid® Weld is a VAE based re-emulsifiable bonding agent. SikaLiquid® Weld is used to bond new concrete, stucco, tile setting beds, and terrazzo to any structurally sound surface, interior, and exterior.

SikaLatex R is an acrylic-polymer latex. It is a non-reemulsifiable, general-purpose admixture to produce polymer-modified concrete and mortar.

SikaGrout Aid is a balanced blend of expanding, retarding, and water-reducing agents for portland cement grouts. It provides a slow, controlled expansion prior to the grout hardening.

Rugasol-S is a spray applied, water soluble liquid, formulated to retard the set of surface mortar in concrete to enable the aggregate to be exposed.

SikaLiquid® Weld is a VAE based re-emulsifiable bonding agent. SikaLiquid® Weld is used to bond new concrete, stucco, tile setting beds, and terrazzo to any structurally sound surface, interior, and exterior. 5 Gallon.

SikaLatex® is an acrylic-polymer latex that is used as admixture for cementitious bonding bridges and high-quality site-mix mortars.

Blend of Expanding, Fluidifying, and Water-Reducing Agents for Portland-Cement Grouts

SikaMix® W-10 is a non-chloride and non-corrosive liquid integral water-repelling admixture for use in concrete masonry units, where zero or very low slump concrete is required.

Sika® FerroGard®-901 S is a liquid concrete admixture formulated to protect embedded reinforcing steel from corrosion and to provide an effective means for extending the service life of concrete structures.

Sikament®-100 SC is a unique bipolymer anti-washout admixture for the underwater placement of concrete and grout. Sikament®-100 SC meets the requirements of CRD-C661-06. 5 Gallon.

Rugasol-S is a spray applied, water soluble liquid, formulated to retard the set of surface mortar in concrete to enable the aggregate to be exposed.

Sika® AIR admixture is an aqueous solution of organic materials. Sika® AIR meets the requirements of ASTM C260 for air entraining admixtures.

Sika® Plastocrete®-161 is a lignin polymer-type water-reducing admixture. Sika® Plastocrete®-161 meets the requirements of ASTM C-494, Types A, B and D admixtures.

SikaSet® NC is a non-chloride, water reducing and accelerating admixture. SikaSet® NC meets the requirements of ASTM C-494 Types C and E admixtures.

SikaLatex® is an acrylic-polymer latex that is used as admixture for cementitious bonding bridges and high-quality site-mix mortars. 55 Gallon.

Sikament®-686 is high range water reducing admixture utilizing Sika’s ViscoCrete® Technology. Its unique formulation is based on polycarboxylate technology. Sikament®-686 meets the requirements for ASTM C-494 Types A and F admixture.

SikaMix® W-10 is a non-chloride and non-corrosive liquid integral water-repelling admixture for use in concrete masonry units, where zero or very low slump concrete is required.

Sika® Rapid-1 is a non-chloride strength/hardening accelerator formulated to increase the early strength of concrete without affecting the initial workability.

Sikament®-100 SC is a unique bipolymer anti-washout admixture for the underwater placement of concrete and grout. Sikament®-100 SC meets the requirements of CRD-C661-06.