CCW BarriTech VP Air & Vapor Barrier 5 Gallon

CCW BarriTech VP Air & Vapor Barrier, 5 Gallon

Barritech VP is a fluid-applied membrane made from inherently fire-resistant materials. Barritech VP is applied to exterior wall assemblies where it functions as an air barrier and a water-resistive barrier. Barritech VP may be installed down to 20°F. Barritech VP is vapor-permeable — moisture vapor can diffuse directly through the membrane. Barritech VP can be applied over concrete block, concrete, exterior gypsum sheathing, plywood, OSB, and many other common building materials. The product fully adheres to the substrate, flexible and rubber-like. Barritech VP is a single-component, air-drying product applied by spray or roller at nominal 0.040" (40 mils) dry film thickness. The high film thickness and flexible, elastic properties enable Barritech VP to bridge cracks and seal around penetrations, which creates a truly continuous, monolithic air and water barrier.

Features:

• Fire-retardant chemistry permits use in many wall assemblies requiring NFPA 285
• Dries to a distinctive blue color for easy identification (lighter blue color when wet)
• 180-day UV resistance and ability to install below freezing allows flexibility in schedule
• Vapor-permeable feature permits use in wall assemblies where a vapor barrier is not needed
• Low VOC, low-emitting product – contributes to safety during installation and contributes to LEED v4 credit EQ Low Emitting Materials
• Easy, water clean-up of tools & equipment reduces harmful chemicals on the job site
• Spray-through standard, one-part equipment provides a simple and quick installation
• Monolithic coverage and self-sealing properties around fasteners enable air and watertight installation
• Non-asphalt composition permits contact with many windows and joint sealants
• Barritech VP is a warranted air/vapor barrier system from Carlisle Coatings & Waterproofing