CS Unitec's 1445H Dust Collection Vacuum has a 99.999% filtration efficiency, 0.1 - 0.3 micron retained particles. and a 99.995% required dust retention under MIL-STD 282 Type C.

6.6-Gallon Wet/Dry Industrial Vacuum

CS Unitec 428956 HEPA Filters for CS 1225 H, CS 1445 H, CS 1500 H Vacuums, 2pk

CS Unitec 416069 Filters for CS 1225, CS 1445 and CS 1500

CS Unitec 416069 Filters for CS 1225, CS 1445 and CS 1500

CS Unitec ETS 225 Drywall Sander, 9" dia., 5.5 Amp, 1,160 RPM

CS Unitec ELS 225.1 Long-Reach Drywall Sander, 9" dia., 5.5 Amp, 1,160 RPM

CS Unitec 303.10KAV 30 AIR is a pneumatic dry antistatic vacuum. It has a 6.8 gal. capacity and includes antistatic tool kit, cloth filter & pack of paper filters.

CS Unitec 303.10KAV 30 AIR Wet/Dry is a pneumatic dry antistatic vacuum. It has a 6.8 gal. capacity and includes an antistatic float assembly, antistatic tool kit, cloth filter & pack of paper filters.

CS Unitec's 1500 K Wet/Dry Vacuum has a sensor for automatic shut off to protect motor and filters. Can be used with or without poly plastic, paper or slurry filter bags.

CS Unitec CS 1225 6.6 Gallon Wet/Dry Industrial Vacuum can help comply with new OSHA silica dust regulations.

CS Unitec CS 1225 K 6.6 Gallon Wet/Dry Industrial Vacuum can help comply with new OSHA silica dust regulations.

CS Unitec 519753 Hose Adapter for CS 1225, CS 1445 and CS 1500

CS Unitec 413235 Hose for CS 1225, CS 1445 and CS 1500

CS Unitec 072401 Cleaning Kit for CS 1225, CS 1445 and CS 1500

CS Unitec 925060230 Cobalt Portable Band Saw Blade, 10-14 TPI, 66" x 5/8"

CS Unitec 925060240 Cobalt Portable Band Saw Blade, 8-12 TPI, 66" x 5/8"

CS Unitec 925060200 Cobalt Portable Band Saw Blade, 8 TPI, 66" x 5/8"

CS Unitec 925060350 Cobalt Portable Band Saw Blade, 10-14 TPI, 71" x 5/8"

CS Unitec 925060340 Cobalt Portable Band Saw Blade, 8-12 TPI, 71" x 5/8"

CS Unitec 925060330 Cobalt Portable Band Saw Blade, 6-10 TPI, 71" x 5/8"

CS Unitec EBS 1802.1 5" 16 Amp 10000 RPM Concrete Grinder w/Diamond Grinding Wheel is used to grind and smooth surfaces, prepare for tile renovation or to clean residue from the project area.

CS Unitec 198804 K-Set for CS 1225, CS 1445 and CS 1500 Vacuums. Kit that includes one hose, one y adapter, and one connector.

CS Unitec 585451 Y-Adaptor for CS 1225, CS 1445 and CS 1500

CS Unitec 435305 Paper Bag Filters for CS 1225 and CS 1445 Vacuums.

The CS Unitec 512120050 Air Hacksaw w/Lever Throttle, 1.5 HP, provides pneumatic power for hazardous environments.

The CS Unitec 512120010 Air Hacksaw w/Roll Throttle, 1.5 HP, provides pneumatic power for hazardous environments.

The CS Unitec 512150070 Electric Hacksaw w/Variable Speed, 1.5 HP

CS Unitec 512200050 Hydraulic Hacksaw, 3.8 HP, Lever Throttle

CS Unitec 512089980 Auto Feed Pipe Clamp (for use with Air Hacksaw 512120010)

CS Unitec 925060010 Cobalt Portable Band Saw Blade, 18 TPI, 44 7/8" x 1/2"

CS Unitec 925060020 Cobalt Portable Band Saw Blade, 14 TPI, 44 7/8" x 1/2"

CS Unitec 925060030 Cobalt Portable Band Saw Blade, 10-14 TPI, 44 7/8" x 1/2"

CS Unitec 925060040 Cobalt Portable Band Saw Blade, 8-12 TPI, 44 7/8" x 1/2"

CS Unitec 925060220 Cobalt Portable Band Saw Blade, 14 TPI, 66" x 5/8"

CS Unitec 25GP-WD Mixing Stand for Handheld Mixing Drills, 64 lbs.

CS Unitec 49004N PTX SuperPolish Belt, Closed, 1.2" x 26"

CS Unitec 416021 Paper Bag Filters for CS 1500

CS Unitec CS 7010-504 is a super-premium, low-viscosity synthetic tool lubricant.

The CS Unitec CS 7020-013 ProLube Solid Cutting Lubricant, 1.6 oz Push Tube, is a super-premium, low-viscosity synthetic tool lubricant.

The CS Unitec CS 7020-000 ProLube Solid Cutting Lubricant, 14.5 oz Push Tube, is a super-premium, low-viscosity synthetic tool lubricant.

The CS Unitec CS 7030-712 ProLube Solid Cutting Paste, 12 oz Tub, is a super-premium, low-viscosity synthetic tool lubricant.

CS Unitec 420592 Slurry Filter Bags (3-pack)

CS Unitec 45180 PTX Gum Wheel, 180 grit, 4 1/8" x 2", Keyed Shaft

CS Unitec 42040 PTX Zirconium Grinding Belt Sleeve works best with an expansion roller.

CS Unitec 42060 PTX Zirconium Grinding Belt Sleeve works best with an expansion roller.

CS Unitec 42080 PTX Zirconium Grinding Belt Sleeve works best with an expansion roller.

CS Unitec 42120 PTX Zirconium Grinding Belt Sleeve works best with an expansion roller.

CS Unitec 42150 PTX Zirconium Grinding Belt Sleeve works best with an expansion roller.

CS Unitec 42180 PTX Zirconium Grinding Belt Sleeve works best with an expansion roller.

CS Unitec 42440 PTX Ceramic Grinding Belt Sleeve uses high-performance ceramic aluminum oxide grain for increased removal rate, longest life and highest productivity. Excels in all metals.

CS Unitec 42460 PTX Ceramic Grinding Belt Sleeve uses high-performance ceramic aluminum oxide grain for increased removal rate, longest life and highest productivity. Excels in all metals.

CS Unitec 42480 PTX Ceramic Grinding Belt Sleeve uses high-performance ceramic aluminum oxide grain for increased removal rate, longest life and highest productivity. Excels in all metals.

The CS Unitec 42010 PTX Fleece Non-Woven Sleeve is nylon impregnated with abrasive grit for removing minor to medium scratch marks and oxidation coatings, matte and satin finishing and deburring applications.

The CS Unitec 42011 PTX Fleece Non-Woven Sleeve is nylon impregnated with abrasive grit for removing minor to medium scratch marks and oxidation coatings, matte and satin finishing and deburring applications.

The CS Unitec 42012 PTX Fleece Non-Woven Sleeve is nylon impregnated with abrasive grit for removing minor to medium scratch marks and oxidation coatings, matte and satin finishing and deburring applications.

The CS Unitec 42009 PTX Fleece Non-Woven Sleeve is nylon impregnated with abrasive grit for removing minor to medium scratch marks and oxidation coatings, matte and satin finishing and deburring applications.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec 1-Series TCT Hole Saw is carbide-tipped and works with hand-held drills with a slip clutch.

CS Unitec Unibroach TCT Hole Saws (2-Series) have a 5/8" effective length to cut accurate, clean holes with hand-held drills with a slip clutch.

CS Unitec Unibroach TCT Hole Saws (2-Series) have a 5/8" effective length to cut accurate, clean holes with hand-held drills with a slip clutch.

CS Unitec Unibroach TCT Hole Saws (2-Series) have a 5/8" effective length to cut accurate, clean holes with hand-held drills with a slip clutch.

CS Unitec Unibroach TCT Hole Saws (2-Series) have a 5/8" effective length to cut accurate, clean holes with hand-held drills with a slip clutch.

CS Unitec Unibroach TCT Hole Saws (2-Series) have a 5/8" effective length to cut accurate, clean holes with hand-held drills with a slip clutch.

CS Unitec Unibroach TCT Hole Saws (2-Series) have a 5/8" effective length to cut accurate, clean holes with hand-held drills with a slip clutch.

CS Unitec Unibroach TCT Hole Saws (2-Series) have a 5/8" effective length to cut accurate, clean holes with hand-held drills with a slip clutch.

CS Unitec Unibroach TCT Hole Saws (2-Series) have a 5/8" effective length to cut accurate, clean holes with hand-held drills with a slip clutch.

CS Unitec Unibroach TCT Hole Saws (2-Series) have a 5/8" effective length to cut accurate, clean holes with hand-held drills with a slip clutch.

CS Unitec Unibroach TCT Hole Saws (2-Series) have a 5/8" effective length to cut accurate, clean holes with hand-held drills with a slip clutch.

CS Unitec Unibroach TCT Hole Saws (2-Series) have a 5/8" effective length to cut accurate, clean holes with hand-held drills with a slip clutch.

CS Unitec Unibroach TCT Hole Saws (2-Series) have a 5/8" effective length to cut accurate, clean holes with hand-held drills with a slip clutch.

CS Unitec Unibroach TCT Hole Saws (2-Series) have a 5/8" effective length to cut accurate, clean holes with hand-held drills with a slip clutch.

CS Unitec Unibroach TCT Hole Saws (2-Series) have a 5/8" effective length to cut accurate, clean holes with hand-held drills with a slip clutch.

CS Unitec ZFR 300.3 Milling Head, 30 Deg. is one of four interchangeable milling heads for CS Unitec's EKF series beveling machines.

CS Unitec ZFR 450.3 Milling Head, 45 Deg. is one of four interchangeable milling heads for CS Unitec's EKF series beveling machines.

CS Unitec ZFR 452.3 Milling Head, 2.5mm Radius is one of four interchangeable milling heads for CS Unitec's EKF series beveling machines.

CS Unitec 30402 MULTI-MAX Stationary Multipurpose Finishing Machine can debur, trim, grind and brush. Includes two shaft mountings to permit linear and rotary work.

CS Unitec 512089990 Auto Feed Pipe Clamp for Use w/Air or Electric Hacksaw

CS Unitec 560309000 Vise Clamp for 4 3/4" Band Saws

CS Unitec 560319400 Vise Clamp for 7" Band Saws

CS Unitec 251259 Reciprocating Saw Pipe Clamp, 1/2" to 6"

CS Unitec 1001 Extra-Thick Reciprocating Saw Blade, 8 TPI, 6" Long, 5pk

CS Unitec 1002 Extra-Thick Reciprocating Saw Blade, 8 TPI, 8" Long, 5pk

CS Unitec 007D/200 Extra-Thick Reciprocating Saw Blade, 8 TPI, 8" Long, 5pk

CS Unitec HSS Extra-Thick Reciprocating Saw Blade, 10/14 TPI, 6" Long, 5pk

CS Unitec 1004 HSS Reciprocating Saw Blade, 10/14 TPI, 12" Long, 5pk

CS Unitec 1003 HSS Reciprocating Saw Blade, 10/14 TPI, 8" Long, 5pk

CS Unitec 3013/150 Bi-Metal Reciprocating Saw Blade, 14 TPI, 6" Long, 5pk

CS Unitec 3013/200 Bi-Metal Reciprocating Saw Blade, 14 TPI, 8" Long, 5pk

CS Unitec 3014/150 Bi-Metal Reciprocating Saw Blade, 18 TPI, 6" Long, 5pk

CS Unitec 3017/90 Bi-Metal Reciprocating Saw Blade, 18 TPI, 3 5/8" Long, 5pk

CS Unitec 3021/150 Bi-Metal Reciprocating Saw Blade, 6 TPI, 6" Long, 5pk

CS Unitec 3021/225 Bi-Metal Reciprocating Saw Blade, 6 TPI, 8" Long, 5pk

CS Unitec 3021/300 Bi-Metal Reciprocating Saw Blade, 6 TPI, 12" Long, 5pk

CS Unitec 3021/300 Bi-Metal Reciprocating Saw Blade, 6 TPI, 12" Long, 5pk

CS Unitec 810C/225 Bi-Metal Reciprocating Saw Blade, 8/10 TPI, 9" Long, 5pk

CS Unitec D12/200 Bi-Metal Reciprocating Saw Blade, Tungsten Carbide Coarse, 8" Long, 2pk

CS Unitec 007/150 M-Tooth Bi-Metal Reciprocating Saw Blade, 6" Long, 5pk

CS Unitec 007/200 M-Tooth Bi-Metal Reciprocating Saw Blade, 8" Long, 5pk

CS Unitec 007/280 M-Tooth Bi-Metal Reciprocating Saw Blade, 12" Long, 5pk

CS Unitec 006/150 M-Tooth Bi-Metal Reciprocating Saw Blade, 6" Long, 5pk

CS Unitec 006/200 M-Tooth Bi-Metal Reciprocating Saw Blade, 7" Long, 5pk

CS Unitec HB300/18 Cengar Bi-Metal Air Saw Blades, Hand Saw Compatible, 18 TPI, 12" Long, 50bx

CS Unitec HB300/24 Cengar Bi-Metal Air Saw Blades, Hand Saw Compatible, 24 TPI, 12" Long, 50bx

CS Unitec HB300/32 Cengar Bi-Metal Air Saw Blades, Hand Saw Compatible, 24 TPI, 12" Long, 50bx

CS Unitec MC220/18 Cengar Bi-Metal Air Saw Blades, 18 TPI, 8 3/4"" Long, 50bx

CS Unitec MYN150/18 Cengar Bi-Metal Air Saw Blades, 18 TPI, 6" Long, 10pk

CS Unitec MYT150/18 Cengar Bi-Metal Air Saw Blades, 18 TPI, 6" Long, 10pk

CS Unitec MB150/18 Cengar Bi-Metal Air Saw Blades, 18 TPI, 6" Long, 5pk

CS Unitec MB200/10-14 Cengar Bi-Metal Air Saw Blades, 10-14 TPI, 8" Long, 5pk

CS Unitec MB200/18 Cengar Bi-Metal Air Saw Blades, 18 TPI, 8" Long, 5pk

CS Unitec MB200/24 Cengar Bi-Metal Air Saw Blades, 24 TPI, 8" Long, 5pk

CS Unitec MB250/18 Cengar Bi-Metal Air Saw Blades, 18 TPI, 10" Long, 5pk

CS Unitec MB250/24 Cengar Bi-Metal Air Saw Blades, 24 TPI, 10" Long, 5pk

CS Unitec MB300/18 Cengar Bi-Metal Air Saw Blades, 18 TPI, 12" Long, 5pk

CS Unitec MB300/10-14 Cengar Bi-Metal Air Saw Blades, 10-14 TPI, 12" Long, 5pk

CS Unitec PTX Flap Wheel has radial abrasive cloth flaps in various grit sizes to remove rust, oxidation layers, minor scratches and to regrain and burnish metals.

CS Unitec 580027000 Pneumatic Pipe Cutting Machine, 2.4 HP, 7" Blade (Sold Separately)

CS Unitec 580100050 Pneumatic Pipe Cutting Machine, 4 HP, 7" Blade (Sold Separately)

CS Unitec 580067000 Hydraulic Pipe Cutting Machine, 4 HP, 7" Blade (Sold Separately)

CS Unitec 5801016PK Pneumatic Pipe Cutting Kit, incl. 4HP Drive, 2 Blades, Diamond & Carbide Blades, Chains, Carriage, Tensioner

CS Unitec 5801032PK Pneumatic Pipe Cutting Kit, incl. 4HP Drive, 2 Blades, Diamond & Carbide Blades, Chains, Carriage, Tensioner

CS Unitec 5801063PK Pneumatic Pipe Cutting Kit, incl. 4HP Drive, 2 Blades, Diamond & Carbide Blades, Chains, Carriage, Tensioner

CS Unitec 5800616HK Hydraulic Pipe Cutting Kit, incl. 4HP Drive, 2 Blades, Diamond & Carbide Blades, Chains, Carriage, Tensioner

CS Unitec 5800632HK Hydraulic Pipe Cutting Kit, incl. 4HP Drive, 2 Blades, Diamond & Carbide Blades, Chains, Carriage, Tensioner

CS Unitec 5800663HK Hydraulic Pipe Cutting Kit, incl. 4HP Drive, 2 Blades, Diamond & Carbide Blades, Chains, Carriage, Tensioner

CS Unitec 580108090 Guide Carriage, Small, for Pipe Cutting Machine

CS Unitec 580108100 Guide Carriage, Large, for Pipe Cutting Machine

CS Unitec 580038300 Chain Tensioner, Small, for Pipe Cutting Machine

CS Unitec 580028400 Chain Tensioner, Small, for Pipe Cutting Machine

CS Unitec 580028710 Tensioning Chain for Pipe Cutting Machine, 37 3/8"

CS Unitec MC220/24 Cengar Bi-Metal Air Saw Blades, 24 TPI, 8 3/4"" Long, 50bx

CS Unitec EHR-32/2.4p Replacement Electric Mixing Motor for PMH80F-DC Mega Hippo Portamix

CS Unitec CS536664-1 Pneumatic Chain Saws for Concrete, 10", 6.5 HP, 32 Lbs.

CS Unitec CS536664-2 Pneumatic Chain Saws for Concrete, 15", 6.5 HP, 33 Lbs.

CS Unitec CS536664-3 Pneumatic Chain Saws for Concrete, 20", 6.5 HP, 34 Lbs.

CS Unitec CS566110-2 Hydraulic Chain Saws for Concrete, 15", 11 HP, 29 Lbs.

CS Unitec CS566110-3 Hydraulic Chain Saws for Concrete, 20", 11 HP, 30 Lbs.

CS Unitec BST 182V/S Anchor Stand for Core Drill Series ENT 162/3

CS Unitec BST 300 V Anchor Stand for Core Drill Series EBM 350/3 PSA, 2 1327, 2 1328

CS Unitec BST 300 Anchor Stand for Core Drill Series EBM 350/3 PSA, 2 1327, 2 1328

CS Unitec BST 90 Anchor Stand for Core Drill END 1550 P, ETN 2001 P

CS Unitec TwinMix 1800 Mixing Station, 17 gal. Capacity, 15 Amp

CS Unitec TWP140 Mixing Paddle for Overlayments and Colored Products, 24" Long, 5.5" Dia.

CS Unitec TWP160 Mixing Paddle for Overlayments and Colored Products, 24" Long, 6.375" Dia.

CS Unitec PWP120 Mixing Paddle for Overlayments and Colored Products, 24" Long, 4.75" Dia.

CS Unitec PWP140 Mixing Paddle for Overlayments and Colored Products, 24" Long, 5.5" Dia.

CS Unitec WG 120 Helical Mixing Paddle, 4.5" dia. for Medium Viscosity Materials (for Mixer EHR 18 S)

CS Unitec WG 135 Helical Mixing Paddle, 5.4" dia. for Medium Viscosity Materials (for Mixers EHR 20.1 R, 7 1111, 7 1112)

CS Unitec WG 160 Helical Mixing Paddle, 6.25" dia. for Medium Viscosity Materials (for Mixer EHR 23/1.4 R, 7 1113)

CS Unitec MG 120 Mortar Mixing Paddle, 4.5" dia. for Mortar & High Viscosity Materials (for Mixers EHR 20.1 R, 7 1111, 7 1112)

CS Unitec MG 140 Mortar Mixing Paddle, 5.4" dia. for Mortar & High Viscosity Materials (for Mixers EHR 20.1 R, 7 1111, 7 1112)

CS Unitec MG 160 Mortar Mixing Paddle, 6.25" dia. for Mortar & High Viscosity Materials (for Mixers EHR 23/1.4 R, 7 1113)

CS Unitec MG 235 Mortar Mixing Paddle, 9.25" dia. for Mortar & High Viscosity Materials (for Mixers EHR 23/1.4 R)

CS Unitec MH 240 H Style Fold & Stir Blade (for Mixers EHR 20.1 R and EHR 23/1.4 R)

CS Unitec 37642 Corundum Sanding Disc for Drywall Sanders, 9", 24 grit, 25/pk

CS Unitec 37643 Corundum Sanding Disc for Drywall Sanders, 9", 60 grit, 25/pk

CS Unitec 37644 Corundum Sanding Disc for Drywall Sanders, 9", 80 grit, 25/pk

CS Unitec 37645 Corundum Sanding Disc for Drywall Sanders, 9", 100 grit, 25/pk

CS Unitec 37646 Corundum Sanding Disc for Drywall Sanders, 9", 120 grit, 25/pk

CS Unitec 37647 Corundum Sanding Disc for Drywall Sanders, 9", 150 grit, 25/pk

CS Unitec 37648 Corundum Sanding Disc for Drywall Sanders, 9", 180 grit, 25/pk