Epoxies & Urethanes

Loctite Epoxy Quick Set is a two-part adhesive consisting of an epoxy resin and a hardener.

Loctite Epoxy Plastic Bonder is an acrylic formula that is specially formulated to bond and repair plastic surfaces.

Loctite LocWeld Epoxy Bonding Compound ia a 15-minute, two-part adhesive and filler system that eliminates the need for welding or brazing.

Loctite Fixmaster Fast Cure Epoxy, Mixer Cups, faster setting version of Loctite Fixmaster General Purpose Epoxy.

LOCTITE EA E-120HP Epoxy Adhesive is an amber, high performance, ultra strong, non-sag, aerospace grade adhesive with a 120-minute working life. Mixing nozzles are not included.

Loctite Fixmaster Fast Cure Epoxy, Mixer Cups, faster setting version of Loctite Fixmaster General Purpose Epoxy.

Loctite EA E-05CL clear two-part epoxy structural adhesive is compatible with ceramic, glass, metal, plastic, rubber and wood materials with a 24 hr cure time.

Adhesive, Epoxy, Two-Part, 50 Milliliter Syringe, Shear Strength 4030 PSI, Viscosity 16000cP, Work Life 45 Minutes, Fixture Time 180 Minutes, Cure time 24 Hours, Off-White Color, 2:1 Mix Ratio. (Mixing nozzles not included.)

LORD Fusor® 124 flexible foam can be used for sound deadening, sealing and filling of door skins to crash bar, hood panel to supports, trunk panel to supports and gas tank filler area.

LORD Fusor® 126SL sealer is a two-component, urethane-based seam sealer used for duplicating factory appearance on truck bed, tooled door skin, floor pan and core support seams.

LORD Fusor® 126 sealer is a two-component, urethane-based seam sealer used for duplicating factory appearance on truck bed, tooled door skin, floor pan and core support seams.

LORD Fusor® 234 sound dampening material is a full-bodied, two-component urethane product used to reduce noise, vibration and harshness (NVH) in all types of dampening applications.

LORD Fusor® 143 plastic repair adhesive can be used on bumpers, bumper tabs, emblems, door trims, interior and exterior plastic repairs and cosmetic repairs.

LORD Fusor® 140 clear plastic bonding adhesive can be used for structural bonding of bumper tabs, emblems, body side moldings, rocker panel claddings and moldings, plastic backer panels, decorative vents, wheel opening moldings, acrylic sun visors, rear wind deflectors, medallions, door edge guards and ground effects.

LORD Fusor® 148 plastic bonding adhesive can be used for installation and bonding of small body panels, ground effects and headlight buckets.

LORD Fusor® 113B metal bonding adhesive meets OEM specifications for aftermarket metal bonding and weld bonding applications. It can be used for panel bonding and weld bonding of quarter panels, rear body panels, roof panels, door skins, van side panels and outer truck bed panels.

LORD Fusor® 109B metal bonding adhesive is specified for use by General Motors, Ford Motor Company and Nissan. It can be used for panel bonding,weld bonding and rivet bonding of properly prepared metals, including aluminum.

LORD Fusor® 114SM plastic finishing adhesive is designed for repair of surface imperfections, scratches and gouges on all plastic bumpers and body panels, including such plastics as PP, fiberglass, Metton®, Telene®, SMC, TEO, urethane and carbon fiber.

LORD Fusor® 111B metal bonding adhesive can be used for patch panel bonding and weld bonding of properly prepared dissimilar metals, cab corners, panel sections and aluminum trailer repair patches.

LORD Fusor® 153 plastic repair adhesive can be used on bumpers, bumper tabs, emblems, door trims, interior and exterior plastic repairs and cosmetic repairs.

LORD Fusor® 126EZ non-sag seam sealer duplicates a factory appearance on truck bed seams, tooled door skin seams, floor pan seams, core support seams and any other application in which a non-sag cosmetic seam sealer is required and where longer work time is desired.

LORD Fusor® 133 plastic repair adhesive can be used on bumpers, bumper tabs, emblems, door trims, interior and exterior plastic repairs and cosmetic repairs.

LORD Fusor® 101EZ plastic repair adhesive can be used for structural and cosmetic repair of body panels, hoods, decks, doors and all types of rigid body plastics such as Metton®, fiberglass, GTX, SMC and carbon fiber.

Norton SpeedGrip 90 Minute Panel Bond Epoxy is a superior two-part epoxy adhesive designed to bond steel, aluminum, SMC, FRP and fiberglass auto parts and panels.

LORD Fusor® 019 bare metal brushable seam sealer duplicates a factory appearance on truck bed seams, tooled door skin seams, floor pan seams, core support seams and other applications in which a bare metal, brushable cosmetic seam sealer is required and where fast work time and fast cycle time are desired.

Structural Adhesive, Urethane, Work Time 20 Minutes, Paintable in 90 Minutes, Two part 220ml Tube, For bonding and repairing steel, aluminum, flexible, semi-rigid and rigid plastic and fiberglass.

Structural Adhesive, Urethane, Work Time 90 Seconds, Cure Time 24 Hours, Two part 220ml Tube, Easy to Sand, For Structural and Cosmetic Repairs of Plastic Bumpers including TPE, TPO, TEO, PP and ABS

LORD Fusor® 108B metal bonding adhesive is specified for use by General Motors, Ford Motor Company and Nissan. It can be used for panel bonding,weld bonding and rivet bonding of properly prepared metals, including aluminum.

LORD Fusor® 142 plastic repair adhesive can be used on bumpers, bumper tabs, emblems, door trims, interior and exterior plastic repairs and cosmetic repairs.

Structural Adhesive, Acrylic, Work Time 45 Minutes, Two part 220ml Tube, Clamp Time 90 Mins, Cure Time 8 Hours, 2:1 Mixing Ratio, Low Odor, For Door Panels, Other Body Sheet Metal, Steel and Aluminum

LORD Fusor® 123 sealer is a two-component, urethane-based seam sealer used for duplicating factory appearance on truck bed, tooled door skin, floor pan and core support seams.

LORD Fusor® 127EZ plastic bonding adhesive can be used for bonding plastic body panels, spoilers and ground effects.

LORD Fusor® 130 rigid acoustical foam can be used in automobile pillars, rocker panel areas and in other locations to promote sound deadening and reinforcement.

LORD Fusor® 129 controlled flow sealer is a two-component, epoxy-based seam sealer used for duplicating factory appearance on roof channels, door seams, drip rails, trunk seams and truck bed floor seams.

LORD Fusor® 123SL sealer is a two-component, urethane-based seam sealer used for duplicating factory appearance on truck bed, tooled door skin, floor pan and core support seams.

LORD Fusor® 123EZ non-sag seam sealer duplicates a factory appearance on truck bed seams, tooled door skin seams, floor pan seams, core support seams and any other application in which a non-sag cosmetic seam sealer is required and where longer work time is desired.

LORD Fusor® 122EZ sealer is a two-component, epoxy-based seam sealer used for duplicating factory seams on drip rails, trunks, core support to apron seams, roof seams and quarter panel to rear deck seams.

LORD Fusor® 121 flexible foam can be used for sound deadening, sealing and filling of door skins to crash bar, hood panel to supports, trunk panel to supports and gas tank filler area.

LORD Fusor® 231 sound dampening material is a full-bodied, two-component urethane product used to reduce noise, vibration and harshness (NVH) in all types of dampening applications.

LORD Fusor® 152 plastic repair adhesive can be used on bumpers, bumper tabs, emblems, door trims, interior and exterior plastic repairs and cosmetic repairs.

LORD Fusor® 141 clear plastic bonding adhesive can be used for structural bonding of bumper tabs, emblems, body side moldings, rocker panel claddings and moldings, plastic backer panels, decorative vents, wheel opening moldings, acrylic sun visors, rear wind deflectors, medallions, door edge guards and ground effects.

LORD Fusor® 147 plastic bonding adhesive can be used for installation and bonding of small body panels, ground effects and headlight buckets.

LORD Fusor® 102 plastic cosmetic repair adhesive can be used to repair scratches and gouges on plastic body panels, hoods, decks and doors.

LORD Fusor® 100EZ plastic repair adhesive can be used for structural and cosmetic repair of body panels, hoods, decks, doors and all types of rigid body plastics such as Metton®, fiberglass, GTX, SMC and carbon fiber.

LORD Fusor® 208B adhesive is a two-component, epoxy-based panel bonding adhesive offering extremely low odor during application and tack-free when cured.

LORD Fusor® 112B metal bonding adhesive meets OEM specifications for aftermarket metal bonding and weld bonding applications. It can be used for panel bonding and weld bonding of quarter panels, rear body panels, roof panels, door skins, van side panels and outer truck bed panels.

LORD Fusor® 110B metal bonding adhesive can be used for patch panel bonding and weld bonding of properly prepared dissimilar metals, cab corners, panel sections and aluminum trailer repair patches.

Structural Adhesive, Acrylic, Work Time 45 Minutes, Two part 220ml Tube, Clamp Time 90 Mins, Cure Time 8 Hours, 2:1 Mixing Ratio, Low Odor, For Door Panels, Other Body Sheet Metal, Steel and Aluminum

LORD Fusor® T21 composite adhesive can be used for repair or bonding of composite body panels including large assembly bonding of fairings, body panels, spoilers, ground effects, wind deflectors, roofs and fender liners.

Structural Adhesive, Urethane, Work Time 7 Minutes, Paintable in 45 Minutes, Two part 220ml Tube, For bonding and repairing steel, aluminum, flexible, semi-rigid and rigid plastic and fiberglass.

LORD Fusor® 132 plastic repair adhesive can be used on bumpers, bumper tabs, emblems, door trims, interior and exterior plastic repairs and cosmetic repairs.

LORD Fusor® T22 truck plastic bonding adhesive can be used for the installation of hood panels, roof panels, fenders, fender liners, fairings, spoilers, wind deflectors, cab extenders, ground effects, headlamp buckets and other body panels.

LORD Fusor® T23 truck plastic bonding adhesive can be used for the installation of hood panels, roof panels, fenders, fender liners, fairings, spoilers, wind deflectors, cab extenders, ground effects, headlamp buckets and other body panels.

LORD Fusor® 114LG plastic finishing adhesive is designed for repair of surface imperfections, scratches and gouges on all plastic bumpers and body panels, including such plastics as PP, fiberglass, Metton®, Telene®, SMC, TEO, urethane and carbon fiber.

LORD Fusor® T19 truck plastic bonding adhesive can be used for the installation of hood panels, roof panels, fenders, fender liners, fairings, spoilers, wind deflectors, cab extenders, ground effects, headlamp buckets and other body panels.

LORD Fusor® 2098 adhesive is a two-component, epoxy-based, structural metal bonding adhesive providing the strength and durability of OEM quality repairs.

Two-component epoxy structural adhesive for use in automotive bonding applications. Adheres to a wide variety of properly prepared substrates including steel and aluminum.

LORD Fusor® 120/T20 composite adhesive can be used for repair or bonding of composite body panels including large assembly bonding of fairings, body panels, spoilers, ground effects, wind deflectors, roofs and fender liners.

Structural Adhesive, Epoxy, Two part 400ml Tube, Work Time 6 Minutes, Sanding Time 15 Minutes, Cure Time 60 Minutes, Easy Sanding, No Adhesion Promoter, For Cosmetic Repairs on All Plastics

Structural Adhesive, Urethane, Two part 400ml Tube, Work Time 3-1/2 Minutes, Sand/Paint Time 30 minutes, Outstanding Sag Resistance, SMC/Fiberglass Repair Adhesive, OEM Approved Pliogrip Adhesive 7773

Structural Adhesive, Urethane, Two part 400ml Tube, Work Time 10 Minutes, Sand/Paint Time 30 minutes, Outstanding Sag Resistance, SMC/Fiberglass Repair Adhesive.

Structural Adhesive, Urethane, Two part 400ml Tube, Work Time 50 Minutes, Sand/Paint Time 3 Hours, Outstanding Sag Resistance, SMC/Fiberglass Repair Adhesive.

Structural Adhesive, Epoxy, Work Time 90 Minutes, Two part 400ml Tube, Clamp Time 4 Hours, Cure Time 24 Hours, 2:1 Mixing Ratio, Low Odor, For Bonding Steel, Aluminum, SMC and Fiberglass Body Panels

Sikadur®-58 CJR is a 2-component, self-leveling, 100 % solids, flexible, control joint resin sealer and adhesive. Part B.

Sikadur®-58 CJR is a 2-component, self-leveling, 100 % solids, flexible, control joint resin sealer and adhesive.

Sikadur 51 SL is a 2-component, self-leveling, 100% solids, flexible, control joint resin sealer and adhesive

SikaFast-3121 is a fast-curing, two component flexible structural methacrylate adhesive for applications requiring quick fixturing for higher throughput. 12 Per Case.

SikaFast®-3511 is a fast curing, 1:1 ratio two-component adhesive system based on methyl-methacrylate (MMA) polymer technology. Uncured SikaFast®-3511 is a thixotropic, nonsagging paste which allows an easy and precise application.

SikaFast®-3531 is a fast curing, 1:1 ratio two-component adhesive system based on methyl-methacrylate (MMA) polymer technology. Uncured SikaFast®-3531 is a thixotropic, non-sagging paste which allows an easy and precise application.

SikaFast®-3551 is a long open time, 1:1 ratio two-component adhesive system based on methyl-methacrylate (MMA) polymer technology. Uncured SikaFast®-3551 is a thixotropic, non-sagging paste which allows an easy and precise application.

SikaFast-3121 is a fast-curing, two component flexible structural methacrylate adhesive for applications requiring quick fixturing for higher throughput.(Mixing nozzles not included. 12 Per Case.

SikaFast-3131S is a 10:1 two part structural structural methacrylate adhesive designed to substitute or complement welding, riveting, clinching and other mechanical fastening techniques used in the manufacture of transportation vehicles.

SikaFast®-3351 is an extended working time, 10:1 ratio two-component white adhesive system based on methyl-methacrylate (MMA) polymer technology. Uncured SikaFast®-3351 is a thixotropic, non-sagging paste which allows an easy and precise application.

SikaFast®-3341 is an extended open time, 10:1 ratio two-component adhesive system based on methyl-methacrylate (MMA) polymer technology. Uncured SikaFast®-3341 is a thixotropic, non-sagging paste which allows an easy and precise application.

SikaFast®-3311 is a fast curing time, 10:1 ratio two-component adhesive system based on methyl-methacrylate (MMA) polymer technology. Uncured SikaFast®-3311 is a thixotropic, non-sagging paste which allows an easy and precise application.

SikaFast-3121 is a fast-curing, two component flexible structural methacrylate adhesive for applications requiring quick fixturing for higher throughput. Straw. (Mixing nozzles not included.) 12 Per Case.