Explosion-Proof Conduit Fitting - Pulling Elbow - 90 deg - Epoxy Powder Coated Aluminum - 1/2"
Brand
Appleton
Item #
APT-ELBD50A
Mfr. Model #
ELBD50A
Product Description
Pulling elbows, also known as pulling fittings, provide a access point for pulling conductors through direction changes in rigid metal conduit (RMC) and intermediate metal conduit (IMC) systems. The removable cover allows wire access without disassembling the conduit run, reducing installation labor on long or complex pulls. They are explosionproof and dust-ignitionproof, rated for Class I Division 1 and Class II Division 1 hazardous locations where flammable gases, vapors, or combustible dusts may be present. Constructed from pressure-cast copper-free aluminum with an epoxy powder coat finish, offering a lightweight, corrosion-resistant alternative to iron — well suited for outdoor, damp, or mildly corrosive environments.
Product Details
| Specification | Description |
|---|---|
| Brand Name: | Appleton |
| Brand Part Number: | ELBD50A |
| Conduit Type: | RMC / IMC |
| Connection Orientation: | 90 deg |
| Dimensions: | 4.000" H x 2.750" W x 5.000" L |
| Enclosure Rating Specs: | NEMA 4 |
| Finish: | Epoxy Powder Coated |
| Fitting Subtype: | Pulling |
| Fitting Type: | Elbow |
| Hazard Rating: | Dust-Ignitionproof / Explosionproof |
| Hazard Rating Specs: | Class III, Class I, Zone 1, Class II, Division 1, Groups E, F, G |
| Material: | Aluminum |
| Specifications Met: | Federal Specification A-A-50563, Class III, Class II, Division 1, 2, Groups E, F, G, CSA 009, C22.2 No. 30, NEMA 4, 7CD, 9EFG, UL E85310, 886, UL Listed For Class 1, Division 1, 2, Groups C, D Class I, Zone 1 and 2, Groups IIA, IIB |
| Trade Size: | 1/2" |
There are no documents for this product.
