SpeedGrip Structural Adhesives – Urethane Adhesives

Norton SpeedGrip Urethane Structural Adhesives are a versatile and fast two part urethane system for bonding and repairing steel, aluminum, flexible, semi-rigid and rigid plastic and fiberglass. All products perform the same on all materials. Just select the working time that best fits your needs

Improve Repair Quality

• OEM quality and performance
• Outstanding corrosion protection
• High strength structural bonding
• 100% solids – no shrinkage

Increase Productivity

• Eliminate application of rust-inhibiting primers
• Faster unclamp times
• Fast application – apply adhesive to one side, not two
• Faster repair time than welding and no heat warpage

WHAT’S THE WORK TIME WINDOW

Depending on the size of the work area to be repaired the work time window will vary. Norton offers five different work time adhesives. Pick your time and you pick your adhesive. It's that simple.

1. FULL CURE TIME IS 24 HOURS BUT THIS MAY BE ACCELERATED WITH HEAT.
2. SPEEDGRIP ADHESIVES SHOULD NOT BE USED FOR BONDING STRUCTURAL COMPONENTS SUCH AS RAILS, PILLARS, ROCKER PANELS, CORE SUPPORTS, ETC. IF IN DOUBT AS TO WHAT IS A STRUCTURAL COMPONENT, CONTACT THE VEHICLE MANUFACTURER.
3. DO NOT APPLY POLYESTER BASED FILLERS (POLYESTER PUTTY/FILLER) TO ANY URETHANE SPEEDGRIP ADHESIVE. IF POLYESTER BASED FILLER MUST BE USED, THE URETHANE SPEEDGRIP MUST BE SEALED WITH ONE OF THE FOLLOWING: PRIMER (EITHER 2 PART EPOXY OR 2 PART URETHANE).

EMI Supply Item #	NOR-04616
Color	Black
Tube Size	220ml / 1:1
Material Type	Urethane
Open Time	5 Minutes
Work Time	7 Minutes
Clamp Time	15 Minutes
Sanding / Painting Time	45 Minutes
Case Qty	6
Brand	Norton
Mfg Item #	636425-04616