SpeedGrip Structural Adhesives – Urethane Adhesives

Norton SpeedGrip Urethane Structural Adhesives are a versatile and fast two part urethane system for bonding and repairing steel, aluminum, flexible, semi-rigid and rigid plastic and fiberglass. All products perform the same on all materials. Just select the working time that best fits your needs

Improve Repair Quality

• OEM quality and performance
• Outstanding corrosion protection
• High strength structural bonding
• 100% solids – no shrinkage

Increase Productivity

• Eliminate application of rust-inhibiting primers
• Faster unclamp times
• Fast application – apply adhesive to one side, not two
• Faster repair time than welding and no heat warpage

EMI Item #		NOR-04616
Item		Adhesive
Type		Structural Urethane
Tube Size (ml)		220
For Bonding / Repairing		Steel, Aluminum, Flexible, Semi-Rigid, Rigid Plastic, Fiberglass
Work Time (Minutes)		7
Clamp Time (Minutes)		15
Sanding / Painting Time (Minutes)		45
Material		Urethane
Color		Black
Mixing Ratio		1:1
Brand		Norton Automotive Aftermarket
Mfg Item #		63642504616

WHAT’S THE WORK TIME WINDOW

Depending on the size of the work area to be repaired the work time window will vary. Norton offers five different work time adhesives. Pick your time and you pick your adhesive. It's that simple.

1. FULL CURE TIME IS 24 HOURS BUT THIS MAY BE ACCELERATED WITH HEAT.
2. SPEEDGRIP ADHESIVES SHOULD NOT BE USED FOR BONDING STRUCTURAL COMPONENTS SUCH AS RAILS, PILLARS, ROCKER PANELS, CORE SUPPORTS, ETC. IF IN DOUBT AS TO WHAT IS A STRUCTURAL COMPONENT, CONTACT THE VEHICLE MANUFACTURER.
3. DO NOT APPLY POLYESTER BASED FILLERS (POLYESTER PUTTY/FILLER) TO ANY URETHANE SPEEDGRIP ADHESIVE. IF POLYESTER BASED FILLER MUST BE USED, THE URETHANE SPEEDGRIP MUST BE SEALED WITH ONE OF THE FOLLOWING: PRIMER (EITHER 2 PART EPOXY OR 2 PART URETHANE).