More Info
DIRECTIONS FOR USE:
Brake pads or linings that have been heavily soiled (impregnated) with oil or grease should be replaced, not cleaned. Consult a professional mechanic.
To help retard the release of asbestos dust and other airborne particulate matter, follow these DIRECTIONS FOR USE carefully and in numerical order:
- Protect rubber parts and boots from accidental overspray.
- Lightly wet down surfaces to be cleaned by spraying in short bursts from a distance of 18 to 24 inches. DO NOT SPRAY ON HOT METAL SURFACES LIKE EXHAUST PIPES.
- After surfaces have been wetted, continue spraying at a distance of 12 to 18 inches to flush contaminants from surfaces. Spray brake parts thoroughly, then allow to air dry or wipe with soft clean cloth.
PRODUCT LIMITATIONS: THIS PRODUCT WILL ATTACK PAINTED SURFACES AND PLASTIC. IF SPRAYED ON, DO NOT RUB SURFACES, FLUSH WITH WATER IMMEDIATELY.
Abrasives
Auto Detail
